Description
White round flush ceiling light 2 × E27 with PIR motion sensor IK08
White round flush ceiling light 2 × E27 with PIR motion sensor IK08 is a light fitting for dry indoor spaces where the light should switch on when movement is detected. An opal diffuser shaped like a shallow dome surrounds two replaceable E27 bulbs, with a small sensor dome visible beneath the diffuser. The white finish blends well with a light-coloured ceiling in a corridor, stairwell or utility area.
The ceiling light has a diameter of 30 cm and is designed for a 230 V power supply. Bulbs are not included — choose two compatible E27 bulbs, each with a wattage not exceeding 60 W.

Round flush ceiling light with adjustable motion and dusk sensor
The PIR sensor responds to movement within a range of approximately 6 metres, with a stated detection angle of 360°. Automatic light activation is useful in passageways where users often have their hands full, as well as in rooms where it is easy to forget to switch the light off.
The operating time can be set from 10 seconds to 3 minutes, while the ambient light threshold can be adjusted from 10 to 2000 lux. This allows the sensor’s operation to be adapted to daytime and evening conditions. Appropriate settings help reduce unnecessary light activation.
Under the cover, there are two sockets for bulbs with the widely used E27 screw base. Their colour temperature and brightness can be selected individually. The opal diffuser reduces direct visibility of the light sources and gives the fitting a uniform appearance.

Product specifications
- Type: round flush ceiling light
- Colour: white
- Bulb base: 2 × E27
- Maximum wattage: 60 W per bulb
- Bulbs included: no
- Replaceable light source: yes
- Power supply: 230 V / 50 Hz
- PIR motion and dusk sensor: yes
- Detection angle: 360°
- Sensor range: up to 6 m
- Operating time: 10 s–3 min
- Light threshold adjustment: 10–2000 lx
- Ingress protection rating: IP20
- Diffuser impact resistance: IK08
- Material: polycarbonate and metal
Product dimensions
- Diameter: 30 cm
- Height: 9 cm
- Weight: 1,08 kg

Why choose a flush ceiling light with a PIR sensor?
- Automatic response to movement – greater convenience when moving through a corridor or stairwell.
- Adjustable time and dusk threshold – settings tailored to the surroundings.
- Two replaceable E27 bulbs – choose light sources to suit your lighting needs.
- Opal diffuser – a uniform appearance across the illuminated surface.
- IK08 – increased resistance to mechanical impacts.
- Round white body – a discreet feature on light-coloured ceilings.

Who is this product suitable for?
This flush ceiling light can be used in a corridor, office, stairwell or another dry room where motion-activated lighting is needed. The white fitting does not dominate the ceiling, while the sensor dome remains easy to identify.
IP20 means indoor use without contact with water. This model should not be treated as a waterproof outdoor ceiling light. Before installation, a suitable 230 V power supply must be provided and the sensor positioned to monitor the intended area of movement.

A flush ceiling light with motion detection can serve as the main light in a small passageway or as an additional fitting along an access route. Two E27 sockets allow you to choose light sources with specifications suited to the size of the interior.

The adjustable illumination time allows operation to be matched to how frequently the passageway is used. When planning the installation, the sensor’s actual range, the position of obstacles and the required illuminance must be taken into account.

Summary
The white 2 × E27 flush ceiling light with a PIR sensor combines an opal diffuser, adjustable detection settings and IK08 impact resistance. It is a functional ceiling fitting for passageways and rooms where the light should respond to the presence of users.









Reviews
There are no reviews yet.