Description
2-in-1 MONO/CCT LED Controller 12–48 V 20 A
2-in-1 MONO/CCT LED Controller 12–48 V 20 A is a module with screw terminals, designed for single-colour LED strips and strips with two shades of white. MONO mode allows brightness control on one channel, while CCT enables adjustment of the balance between warm and cool light in a compatible lighting load.
The housing is white, elongated and fitted with green terminals on both sides. This allows wires to be connected directly to the controller, without factory-fitted wiring harnesses. The compact shape makes it easier to position the component in a suitably prepared installation space.
The module supports a 2,4 GHz radio signal and also provides an input for a momentary push button. The remote control, Wi-Fi gateway and power supply are selected separately, according to the chosen control method. The offer includes one control unit.

MONO/CCT LED Controller for Brightness and White Light Adjustment
When used with a single-colour strip, the light intensity can be adjusted. When connected to a dual-white strip, the controller distributes signals between the channels responsible for warm and cool white. The mode selection depends on the type of strip and does not turn a standard single-colour strip into a light source with adjustable colour temperature.
The built-in momentary push-button input allows commands to be sent locally, rather than mechanically disconnecting the device’s power supply. This solution is useful when a simple control point in the room is needed alongside radio control.
The module features a memory function for previously configured settings. After an interruption in system operation, there is no need to set every value again. App-based control, however, requires a compatible gateway for internet communication, purchased separately.
This version with increased load capacity operates across a wide DC voltage range. The total permissible output current must be considered together with the strip specifications and the capacity of the separate power supply.
Product Specifications
- Type: dual-mode LED controller
- Operating modes: MONO or CCT
- Operating voltage: 12–48 V DC
- Total output current: maximum 20 A
- Connectivity: RF 2,4 GHz
- Connection: screw terminals
- Additional control: momentary push-button input
- Functions: brightness adjustment, white colour temperature adjustment in CCT mode, settings memory
- Housing: white, plastic
- Contents: 1 controller without remote control or power supply
Product Dimensions
- Length: 11,9 cm
- Width: 4,7 cm
- Height: 2,3 cm
- Module weight: approximately 0,05 kg

Why Choose the MONO/CCT LED Controller?
- Dual-mode operation – one controller supports different types of white lighting.
- Direct connection terminals – screw terminals allow compatible wires to be connected.
- Push-button control option – the momentary input provides an alternative way to send control commands.
- Wireless communication – the RF receiver works with suitable remote controls.
- High load capacity – the 20 A output limit allows the controller to be selected for a demanding circuit.
- Settings memory – the module retains settings, reducing the need for reconfiguration.
Who Is This Product Suitable For?
The controller is useful when preparing installations with strips emitting a single shade of white or two shades of white light. It is intended for users who want to adjust brightness or colour temperature without introducing RGB colour control.
When selecting the module for an installation, the current, voltage and type of lighting load should be taken into account. The momentary push-button function allows local control to be planned, while the radio system enables the use of compatible remote control accessories.
Summary
The dual-mode controller with a white housing enables operation with suitable MONO and CCT strips. Screw terminals, radio control and the option to use a push button provide flexibility when configuring white lighting. Select the remaining system components according to its specifications.





Reviews
There are no reviews yet.