Description
Metal LED Power Supply 12 V 250 W IP20 for LED Strips
Metal LED Power Supply 12 V 250 W IP20 for LED Strips is a constant-voltage power supply for 12 V LED installations. The unit provides a rated power of 250 W and a current of 20,83 A. Its long silver housing is made of metal and features openings that help dissipate heat.
The unit is designed to power suitably selected 12 V devices. The ventilated metal housing allows the installation to be planned with access to the terminal block and sufficient space for cooling.
The IP20 rating means the unit must be used in a dry, sheltered location. The power supply is not resistant to water splashes or rain and must not operate with exposed electrical parts.

Metal 250 W LED Power Supply for 12 V Installations
The rated power of 250 W allows installations to be designed with a higher total power demand than individual small LED modules. However, the loads of all connected components must be added together, and an appropriate power reserve must be maintained.
The output current of 20,83 A allows the requirements of connected devices to be compared with the power supply specifications. Devices rated for 24 V are not compatible with its 12 V output and must not be connected without a suitable installation solution.
Ventilation openings are distributed across the elongated metal housing. To ensure they function properly, the housing must not be tightly enclosed without providing the required cooling conditions. Connections and cables must remain properly protected.
The unit measures 22,7 cm in length, 7,2 cm in width and 4,5 cm in height. These dimensions allow its position to be planned within a dry service area of the installation. Work involving the mains power supply should be carried out by a qualified installer.

Product Specifications
- Type: constant-voltage LED power supply
- Power: 250 W
- Voltage: 12 V
- Current: 20,83 A
- Protection rating: IP20
- Housing material: metal
- Colour: silver
Product Dimensions
- Length: 22,7 cm
- Width: 7,2 cm
- Height: 4,5 cm
- Gross weight: 0,53 kg


Why Choose a 250 W LED Power Supply?
- Higher rated power – allows extensive 12 V LED circuits to be planned.
- 20,83 A current – makes it easier to check the compatibility of connected devices.
- Ventilation openings – help dissipate heat.
- Metal housing – provides mechanical protection for the unit.
- Terminal block – allows connections to be made professionally.
- Defined dimensions – allow space for the unit to be planned.
Who Is This Product Suitable For?
The 250 W power supply is suitable for installers preparing 12 V LED lighting with multiple appropriately selected devices. The unit forms part of a technical system rather than a complete light fitting. Its conditions of use depend on the required power and the IP20 protection rating.
Before installation, check the voltage of all connected devices, their current requirements, the required protective measures and the space available for ventilation. The installation must prevent accidental contact with electrical components.
Frequently Asked Questions About the 12 V 250 W LED Power Supply
What Is a 250 W 12 V LED Power Supply Used For?
The 250 W power supply is used to power compatible 12 V LED devices. Selection must take into account the total load, the rated current of 20,83 A and an appropriate power reserve. Devices requiring a different voltage must not be connected simply because they look similar.
Is the Metal 250 W Power Supply Suitable for Outdoor Use?
The power supply has an IP20 protection rating and is not intended to operate without protection in rain or where water splashes occur. A dry service location, properly protected terminals and ventilation must be provided. The openings in the metal housing provide cooling during operation.
How Much Space Does the 250 W LED Power Supply Require?
The metal housing measures 22,7 cm in length, 7,2 cm in width and 4,5 cm in height. When planning the installation, allow space for cables, terminals and unrestricted airflow. The gross weight is 0,53 kg, and the housing has an elongated shape.
Summary
The 250 W 12 V 20,83 A LED power supply with a ventilated metal housing is designed for compatible indoor installations. IP20 requires a dry location, while the elongated housing allows its mounting position to be planned within the installation. Choose it when the load and voltage of the entire system match its specifications.









Reviews
There are no reviews yet.