Description
Connector for 8 mm SMD/COB LED Strips, 4 A, with 15 cm Leads
Connector for 8 mm SMD/COB LED Strips, 4 A, with 15 cm Leads is a small accessory with a transparent snap-lock housing and two outgoing wires. It allows a compatible LED strip to be connected without soldering the contact at its end. The red and dark wires emerge directly from the connector, providing ready-to-use electrical leads.
Applications include narrow strips using SMD and COB technology. The snap-lock mechanism closes over the metal contact pads, allowing the strip to be connected to the wires mechanically. This makes connecting a strip section simpler in installations where there is no need to run another strip in a continuous line.
The transparent body reveals the clamping components, while the additional photographs show how the strip is positioned relative to the contacts. The product consists of a single connecting component; the LED strips in the photographs illustrate how the connector is used and are not included.

Snap-Lock Connector with Leads for SMD and COB Strips
The clamping contacts allow the light strip to be connected without soldering it to the cable. This solution is intended for low-voltage systems requiring two wires leading from the end of the strip. The housing is lightweight and made of plastic.
In this model, the leads are an integral part of the connector. This makes it easier to route the cable from the end of the strip towards the other installation components. However, it is not designed to join two strip sections directly on either side without an intervening cable.
The IP20 protection rating makes this type of accessory suitable for dry indoor spaces. The connector is neither a light source nor a power supply. Its purpose is to provide electrical contact between a compatible LED strip and the pre-attached leads.


Product Specifications
- Type: single-ended connector with leads
- Strips: SMD/COB, 8 mm wide
- Connection: 2 pins
- Current: 4 A
- Voltage: 12 V or 24 V
- Cable: 15 cm
- Material: plastic
- Housing colour: transparent
- Protection rating: IP20
- Quantity supplied: 1 piece
Product Dimensions
- Width: 1 cm
- Height: 0,5 cm
- Depth: 1,1 cm
- Gross weight: 0,004 kg

Why Choose a Connector with Leads?
- Solderless connection – the metal contacts inside the snap-lock mechanism clamp onto the LED strip pads.
- Integrated cable – the wires are factory-fitted and emerge from one side of the housing.
- Transparent housing – makes it easier to visually check the alignment of the contact points.
- SMD and COB compatibility – suitable for the specified technologies with the correct strip width.
- Two-core cable – allows connection to the positive and negative paths of the circuit.
- Narrow design – allows the connector to fit compact light strips.
Who Is This Product Suitable For?
This component is intended for anyone terminating an LED strip section with a cable connection rather than another strip section. It can be used when assembling furniture, linear or decorative lighting installations, provided the specific devices operate within a compatible low-voltage system.
The user receives a ready-to-use pair of leads in a snap-lock housing. The main practical benefit is eliminating the need to solder wires to the strip; contact alignment, correct polarity and electrical compatibility remain essential.
Summary
The single-ended SMD/COB connector with leads offers a snap-lock connection, a transparent housing and pre-attached wires. It is a good choice when a light strip section needs to end with an electrical connection rather than another section of strip.









Reviews
There are no reviews yet.