Description
End Cap for 6/12 Flexible LED Neon
The end cap for 6/12 LED neon is a small finishing component for closing the end of a compatible silicone profile. It helps conceal the open edge of the flexible light strip and gives the end of the installation a neat appearance. Eight colours are available: white, red, purple, pink, yellow, blue, orange and green. Each colour is a separate variant within the same product listing.
The accessory has a rounded end and takes the form of a short, fitted cap. It features a small recess and a shape that allows it to fit over the corresponding end of the profile. The photographs show the shape of the end cap and selected colour versions. The product is a finishing component, rather than a standalone light source.
The unit of sale is one end cap in the selected colour. The photograph showing two caps illustrates their shape from two sides and does not indicate a set of two pieces. Before purchasing, please establish whether the neon being used belongs to the compatible family designated 6/12.

End Cap for 6/12 LED Neon in Eight Colours
A suitable finish for the flexible light strip is important both for simple shelf lighting and for installing decorative outlines. The visible end of the profile can affect the appearance of the entire arrangement, so an accessory in a matching colour helps maintain a uniform appearance along the strip.
The colour of the end cap can be matched to the shade of the flexible cover to maintain a consistent appearance throughout the design. However, the cap should not be selected solely on the basis of colour. The most important factor is compatibility with the shape and cross-section of the silicone cover’s end. A component intended for a different design may not fit correctly.
The accessory contains no LEDs, wires or power supply. It does not change the light colour or provide lighting control. It serves a mechanical and finishing purpose as part of an installation assembled separately. Selecting a version involves matching the colour and ensuring compatibility with the profile being used.
Fitting the end cap alone does not establish that the connection is watertight. If the entire lighting strip is to maintain a specific ingress protection rating, the closure method, suitable sealing materials and installation guidelines for the particular system must be taken into account. Choosing the correct accessories is especially important where the installation may be exposed to moisture.

Product Specifications
- Type: end cap
- Intended for: flexible LED neon profile
- Compatibility system: 6/12
- Available colours: white, red, purple, pink, yellow, blue, orange, green
- Number of components: 1 piece
- Lighting element: none
- Power supply: not applicable
- Application: finishing the end of a compatible profile
Product Dimensions
- Profile designation: 6/12
- Compatible profile: cross-section approximately 6 × 12 mm
- Exact end cap dimensions: not provided by the manufacturer
- Weight: estimated at 0,01 kg per piece
The dimensional designation refers to the compatible LED profile, rather than the measured size of the cap itself. It is advisable to confirm the fit against the system being used.

Why Choose an LED End Cap?
- Profile finishing – allows the open end of compatible neon to be covered.
- Eight colour variants – white, red, purple, pink, yellow, blue, orange and green.
- Separate component – purchase exactly the component required for the installation work.
- Simple shape – a small detail that does not dominate the light strip.
- Designated product family – makes profile compatibility easier to verify.
- Product views – allow the shape of the end cap to be compared before purchasing.

Before finishing the neon, please plan the number of ends requiring a separate cap and check how the profile should be prepared. Additional sealing materials specified for the particular system may be needed to protect the ends in damp locations. The coloured cap alone does not establish that the entire installation is watertight.

Who Is This Product Suitable For?
The end cap is intended for finishing work on compatible LED neon, particularly in places where the end of the silicone strip remains visible. It may be needed when lighting a display cabinet, a decorative sign or fitted furniture using flexible neon.
The person preparing the installation should check that the system designation matches and verify how the end of the profile should be protected. Colour alone does not guarantee a proper fit. Where moisture resistance is required, the appropriate sealing method must be used for the entire connection.

Please pay attention to compatibility of the design, as well as the colour. An end cap for a 6/12 profile may not fit neon with a different shape or cross-section. The photographs show individual caps or two views of one type of accessory, while each purchase always consists of one piece of the selected variant.

Summary
The coloured end cap is a small accessory for neatly closing the end of suitable LED neon. Please select the appropriate colour version, check compatibility with the profile and ensure that the end of the installation is properly protected.









Reviews
There are no reviews yet.