Description
12 V 120 LED/m IP20 LED strip 100 m – warm or cool white
12 V 120 LED/m IP20 LED strip 100 m is a self-adhesive lighting strip supplied on a large, one-hundred-metre roll. It is designed for creating decorative lines of light in indoor spaces. Choose the warm white 3000 K version or the cool white 6500 K version, depending on the desired lighting effect.
Each metre of the strip features 120 SMD 2835 LEDs, allowing you to create a consistent line of illumination. A generous supply of material on a single roll can be practical when installing several separate sections in extensive kitchen cabinetry, on shelving or in decorative recesses.
The strip has a narrow profile and is designed to follow the intended mounting surface. The product does not include a ready-made light fixture and requires a suitably selected 12 V power supply. The entire 100 m should not be treated as a single powered run without further assessment of the installation.

LED strip with 120 LEDs per metre for illuminating cabinetry
The high LED density makes it easier to create an even lighting accent along shelves, cabinets, plinths or ceiling trim. The 120° beam angle helps illuminate the surface adjacent to the strip. Thanks to its self-adhesive backing, the strip can be positioned where a discreet light source is important.
The warm white 3000 K version consumes 9,6 W per metre and can give the interior a cosier feel. The cool white 6500 K version operates at 11 W per metre, providing a more distinct, visually cooler shade. Both versions offer a luminous flux of approximately 1000 lm/m according to the product specifications, but differ in power consumption.
The strip is designed to operate at 12 V, so it requires a compatible power supply. Larger installations require planning for separate runs, suitable wiring and power distribution, as well as allowance for voltage drop and heat dissipation.
The IP20 protection rating means the strip is intended for use in dry indoor spaces. It is not a ready-made solution for areas exposed to rain or splashing water. If the project requires cutting, use only the marked cutting points on the specific strip and compatible connection accessories.


Product specifications
- Type: LED strip on a roll
- Total roll length: 100 m
- LEDs: SMD 2835, 120 LED/m
- Voltage: 12 V
- Warm white version: 3000 K, 9,6 W/m
- Cool white version: 6500 K, 11 W/m
- Luminous flux: approximately 1000 lm/m
- Beam angle: 120°
- Protection rating: IP20
- Light colour: fixed for the selected version
Product dimensions
- Strip length: 100 m
- Strip width: 0,8 cm
- Strip thickness: 0,2 cm
- Package dimensions: 25,5 × 4 × 25,5 cm


Why choose an LED strip on a 100 m roll?
- Generous length: material for creating numerous separate illuminated sections.
- High LED density: 120 LED light points per metre.
- Two light colours to choose from: warm or cool white to suit the interior aesthetic.
- Flexible design: makes it easier to run lines of light along cabinetry.
- 12 V power supply: compatible with suitable low-voltage components.
- Fixed light colour: a consistent appearance throughout the entire roll in the selected version.

Who is this product suitable for?
This solution is primarily intended for larger interior finishing projects requiring a substantial amount of lighting strip. It can be useful for furniture installations, decorative lighting across several rooms or creating a series of separate indoor accent lighting sections.
Choose a warm shade for cosier interiors and a cool shade for designs featuring distinct, cooler light. The power consumption of each version must be taken into account when selecting power supplies and wiring. A large roll requires careful planning of the entire electrical installation before fitting begins.
Summary
The 12 V 120 LED/m LED strip on a 100 m roll is designed for creating multiple decorative lighting lines in dry indoor spaces. Choose the appropriate light colour and plan a suitable power supply for each run before installation.









Reviews
There are no reviews yet.