Description
LED Strip 12 V 24 W 5 m – Red or Green
The LED strip 12 V 24 W 5 m is a flexible strip for decorative lighting along furniture edges, shelves and architectural features. You can choose a version that emits red or green light. These are two fixed, single-colour variants, rather than an RGB system that switches between multiple colours.
The self-adhesive design allows the strip to be fitted along flat surfaces and fitted furniture. Its narrow profile helps minimise the visibility of the strip itself, keeping the continuous line of light as the main feature. Red creates a striking accent in a bedroom or entertainment area, while green highlights contrasts on stairs and in recesses.
The product may only be cut at the points designated by the manufacturer. Using the strip requires a suitable low-voltage power supply and correctly prepared connections.

Single-Colour 12 V LED Strip in IP20 or IP65 Versions
Each metre contains 60 SMD LEDs, providing a total of 300 light points per roll. This arrangement creates a consistent effect over longer lengths. The 120° beam angle makes it easy to illuminate an adjacent surface, such as a wall, furniture plinth or the inside of a shelving unit.
The strip is available with two ingress protection ratings. The IP20 version has exposed LEDs and is intended for dry interiors – shelves, recesses and fitted furniture. The IP65 version is protected against dust and water jets, so the manufacturer permits its use in areas exposed to moisture and outdoors. Proper preparation of the connections is essential for the operation of the entire installation.
Both versions emit a single chosen colour. This allows you to plan a uniform decorative effect without a colour-switching function. A compatible 12 V power supply is required for operation. The strip must not be connected directly to household mains voltage.


Product Specifications
- Type: single-colour LED strip
- Voltage: 12 V
- Power: 24 W
- Light colour: red or green
- Number of LEDs: 60 LED/m, 300 per roll
- Luminous flux: 500 lm/m
- Beam angle: 120°
- Ingress protection rating: IP20 or IP65 depending on the variant
- Substrate: PCB
Product Dimensions
- Roll length: 5 m
- Strip width: 0,8 cm
- Thickness: 0,3 cm


Why Choose a Single-Colour LED Strip?
- Two light colour options: red and green create different decorative effects.
- Flexible design: allows a line of light to run along fitted furniture.
- Evenly spaced LEDs: provide a consistent appearance along the illuminated section.
- Two ingress protection options: IP20 for dry interiors or IP65 for areas exposed to moisture.
- Can be cut to length: adjust the length at the marked cutting points.
- Low voltage: works with a suitable 12 V power supply.
Who Is This Product Suitable For?
The IP20 version provides decorative lighting for shelves, recesses and fitted furniture in dry rooms. The IP65 version is also suitable for bathrooms, above kitchen worktops and outdoors. Red provides an intense accent, while green highlights contrasts between decorative elements.
If you intend to change the light colour during use, choose an RGB system. The single-colour strip is designed for people who need a specific light colour and want to maintain it throughout the installation.
Summary
The single-colour LED strip allows you to create a continuous decorative accent in red or green. Its flexible form, low voltage and choice of IP20 or IP65 ingress protection make the strip suitable for both dry interiors and areas exposed to moisture. Using a compatible power supply and properly sealing the ends is essential.









Reviews
There are no reviews yet.