Description
E14 ST26 LED Fridge Bulb, 3 W, 4000 K
E14 ST26 LED Fridge Bulb, 3 W, 4000 K is a compact light source designed for selected refrigerators and fridges fitted with an E14 socket. It has a small bulb envelope measuring 2,6 cm in diameter, a height of 6 cm and a power rating of 3 W. This makes it suitable for fittings where a standard, larger bulb will not fit beneath the cover.
The bulb emits light with a neutral colour temperature of 4000 K and a luminous flux of 300 lm. The white, frosted cover diffuses light inside the refrigerator compartment, making it easier to identify products on the shelves. The metal screw base allows the light source to be installed in a suitable E14 socket.
The product is sold individually – 1 piece. Before choosing it, compare the new bulb’s specifications with the appliance manual, particularly the screw base type, dimensions, voltage and permitted lighting type.

E14 LED Fridge Bulb with Neutral 4000 K Light
Interior fridge lighting helps you find food items without needing additional kitchen lighting. Neutral white has a less yellow tint than warm light and allows you to see the contents of the shelves clearly. The declared luminous flux of 300 lm applies to one bulb, rather than a set of several light sources.
The small ST26 shape is suited to applications where space for the socket and bulb envelope is limited. The light source has a diameter of 26 mm and an overall height of 60 mm. In fridges, it is particularly important to check the lamp cover to ensure that it does not prevent the new light source from being installed.
The E14 screw base has a smaller diameter than the common E27 base. They cannot be used interchangeably. The bulb is designed for a supply voltage of approximately 230 V and a frequency of 50 Hz, so it should only operate within a compatible appliance electrical system.
This model does not support dimming or electronic colour adjustment. The 4000 K colour temperature is a fixed product characteristic. The IP20 protection rating does not indicate water resistance, so the light source must be installed in a properly protected fridge fitting, without direct contact with liquids.

Product Specifications
- Type: small ST26 LED bulb
- Intended use: compatible refrigerator and fridge fittings
- Number of pieces: 1
- Base: E14
- Power: 3 W
- Luminous flux: 300 lm
- Light colour: neutral white 4000 K
- Voltage: approximately 230 V / 50 Hz
- Beam angle: 300°
- Colour rendering: CRI 80
- Energy efficiency class: F
- Protection rating: IP20
- Dimmable: no
- Declared lifespan: 20 000 hours
Product Dimensions
- Light source diameter: 2,6 cm
- Height: 6 cm
- Depth: 2,6 cm
- Packaging: approximately 2,5 × 2,5 × 6,5 cm
- Weight: approximately 0,022 kg according to the dimensional data
Before purchasing, compare the actual space inside the appliance’s lamp cover with the dimensions of a single bulb.
Why Choose a Small ST26 3 W Bulb?
- Compact shape – a diameter of 26 mm and a height of 60 mm for selected fittings with limited space.
- E14 base – compatibility with appliances equipped with the appropriate socket.
- Neutral white 4000 K – clear illumination of the contents of the shelves.
- Brightness of 300 lm – a specification that helps you select a suitable light source.
- Power rating of 3 W – a characteristic of this small LED light source.
- Wide 300° beam angle – light spreads around the small cover.
- Sold individually – purchase a single replacement instead of an entire multipack.
Who Is This Fridge Bulb Suitable For?
This model is intended for people replacing a light source in a refrigerator, fridge or another compatible appliance with a small E14 screw socket. It may be a suitable choice when a small bulb envelope and neutral light are required, provided the fitting’s design permits the use of this type of LED light source.
Not every fridge uses replaceable bulbs. Many appliances use integrated LED modules for lighting. Before ordering, check the appliance documentation and make sure that a bulb with the stated specifications can be safely replaced. Installation should be carried out with the appliance disconnected from the power supply.
Frequently Asked Questions About the E14 ST26 3 W LED Bulb
Does this bulb fit every fridge?
No. It only fits compatible E14 fittings that permit an LED bulb with these specifications and dimensions. Check the fridge manual before purchasing, as some appliances have integrated lighting.
What kind of light does the bulb emit?
It emits neutral white 4000 K light with a declared luminous flux of 300 lm. The light colour is fixed and cannot be changed during use. This shade is suitable for illuminating the interior of a refrigerator.
How large is the ST26 bulb?
It is 6 cm high and approximately 2,6 cm in diameter. This is a small light source with an E14 screw base, but the available space and the position of the appliance’s lamp cover must be checked before installation.
Can it be installed in place of an E27 bulb?
No. E14 and E27 are different screw base types. This version requires an E14 socket and a compatible 230 V supply. Do not attempt to install it in another fitting that does not meet the appropriate technical requirements.
Is the bulb waterproof?
No. The IP20 rating does not indicate resistance to immersion or splashing. The light source should be protected by an appropriate, compatible appliance enclosure and installed in accordance with the instructions for safely replacing the lighting.
Summary
The ST26 3 W LED bulb is a single light source for compatible fridges with an E14 socket. Its small diameter, neutral 4000 K light colour and luminous flux of 300 lm help you select a replacement, provided compatibility with the appliance has been confirmed.









Reviews
There are no reviews yet.