Description
A60 E27 9 W LED Bulb with Dusk Sensor – Set of 10
A60 E27 9 W LED Bulb with Dusk Sensor – Set of 10 is a pack of ten A60 bulbs with built-in dusk control. Each light source has an E27 base, emits 820 lumens and consumes 9 W of electrical power. The entire pack is sold as one set.
Operation is based on the ambient light level. When the room gets darker, the dusk sensor can switch the light on, without requiring a separate sensor. This is an important distinction: there is no function that responds to people moving around.
This solution can simplify everyday lighting operation in places where illumination is required after dark. Each of the ten bulbs operates in its own socket, so this is not a shared central control system.

E27 9 W Bulb with Dusk Sensor – Automatic Lighting After Dark
Detecting a drop in brightness is the key feature of this design. It does not require the switch to be pressed every evening, provided that the light source has a suitable power supply. The sensor needs to detect the ambient light level, so not every enclosed housing will be equally suitable.
This version provides warm light with a colour temperature of 3000 K. In many applications, this shade is chosen for its calmer character compared with neutral light. The luminous flux of 820 lm allows brightness to be compared with other light sources without equating wattage with the amount of light produced.
Light distribution covers an angle of 200°. This matters when choosing a light fitting, as the bulb does not emit a narrow, focused beam like a typical spotlight. The A60 body is 11 cm high and approximately 6 cm across, so the bulb should be checked for compatibility with the shade before installation.
The model has an IP20 rating and is not dimmable. It is designed for a 230 V mains supply, with a rated lifespan of 20 000 hours and a CRI of 80. These specifications apply to a single bulb, rather than the combined total for all ten.

Product Specifications
- Type: A60 LED bulb
- Control: dusk sensor
- Motion response: no
- Base: E27
- Power supply: 230 V
- Power per bulb: 9 W
- Luminous flux per bulb: 820 lm
- Light colour: warm 3000 K
- Beam angle: 200°
- CRI: 80
- Lifespan: 20 000 h
- Dimmable: no
- IP rating: IP20
- Energy efficiency class: F
- Material: plastic
- Pack contents: 10 bulbs
Product Dimensions
- Height: 11 cm
- Width: 6 cm
- Depth: 6 cm
- Gross weight of the set: 0,35 kg


Why Choose This Set?
- Dusk sensor built into the bulb – no separate device is needed to detect a drop in brightness.
- A set of ten bulbs – convenient for equipping multiple lamps of the same type.
- 820 lm per bulb – brightness expressed in terms of luminous flux.
- 3000 K light colour – a warm, consistent shade across all light sources.
- E27 screw base – suitable for use in compatible light fittings.
- No motion detection – a clearly defined type of automatic control, without confusion with a presence sensor.
Who Is This Product Suitable For?
This product suits property owners who want lighting operation to depend on the time of day without replacing entire lamps. This applies only to fittings with the correct screw socket and dry locations where the LED light source can operate under suitable conditions.
This product is not intended for a scenario in which a person entering causes the light to switch on. That application requires a motion sensor, whereas this bulb monitors only the ambient light level. It is worth understanding this difference before equipping multiple lighting points.
Summary
Ten E27 9 W light sources in one pack allow several fittings to be equipped with 3000 K lighting that switches on according to ambient brightness. The absence of a motion sensor clearly defines their purpose: illumination after dark, rather than after detecting someone’s presence.









Reviews
There are no reviews yet.