Description
Round LED ceiling light module 20 W Ø16,5 cm
The round 20 W LED module with a diameter of 16,5 cm is a ready-to-install replacement lighting component for suitably designed ceiling fixtures. SMD LEDs are arranged across its surface, while the magnetic mounting allows the component to be fitted inside a compatible metal light housing.
With a power consumption of 20 W, the module delivers a luminous flux of 2050 lm. The wide 150° beam angle helps distribute light through the ceiling light diffuser where diffuse room lighting is required. The flat housing is only 2,5 cm high and can fit into a suitably prepared space within the fixture.
Two separate versions with a fixed colour temperature are available: warm 3000 K and neutral 4000 K. Both have the same power, luminous flux and dimensions. The selected colour temperature remains constant during operation.

Magnetic 20 W LED module for light source replacement
The module is designed for compatible fixtures in which the complete lighting component can be replaced without replacing the entire housing. Its flat shape allows installation in a ceiling light with limited internal height, while the magnets help hold the component securely in position on a suitable metal surface.
Aluminium and plastic are the main construction materials. The module has a diameter of 165 mm and is equipped with a power supply component and wires for correct electrical connection. Before installation, the internal dimensions of the light and the compatibility of its mounting must be checked.
The 150° beam angle provides diffuse illumination in fixtures with a suitable diffuser. A colour rendering index of CRI 85 helps illuminate everyday objects accurately. The LEDs have a rated service life of 25 000 hours under the specified operating conditions.
The module is designed for a 230 V power supply and is not dimmable. Its IP20 protection rating means it must be installed in dry indoor areas. Due to the mains voltage, electrical connection work should be carried out by a suitably qualified person with the power supply disconnected.

Product specifications
- Type: replacement LED ceiling light module.
- Light source: SMD LEDs.
- Power: 20 W.
- Voltage: 230 V.
- Colour temperatures: warm 3000 K or neutral 4000 K.
- Luminous flux: 2050 lm.
- Beam angle: 150°.
- CRI: 85.
- Service life: 25 000 hours.
- Energy efficiency class: F.
- Dimmable: no.
- Protection rating: IP20.
- Material: aluminium, plastic.
- Mounting: magnetic.
Product dimensions
- Diameter: 16,5 cm.
- Width: 16,5 cm.
- Height: 2,5 cm.
- Net weight: 0,127 kg.
- Weight including packaging: approximately 0,149 kg.
- Packaging: 16,5 × 16,5 × 3 cm.
Before installation, check the available space beneath the diffuser and ensure the mounting is suitable.
Why choose the round 20 W LED module?
- Replacement component for compatible ceiling fixtures.
- 2050 lm at a power of 20 W.
- Two colour temperatures warm 3000 K and neutral 4000 K.
- Magnetic mounting inside a compatible metal fixture.
- Low-profile housing with a height of 2,5 cm.
- Wide beam angle of 150°.
- LED service life of up to 25 000 hours under rated conditions.
Who is this product suitable for?
The module is suitable for servicing and replacing lighting components in compatible ceiling lights. It can be a practical solution when the light housing remains in good condition but the light-emitting component has become damaged or worn out.
The correct diameter, mounting method and electrical specifications must all be matched to the fixture. The warm 3000 K colour temperature may suit lighting for relaxation, while neutral 4000 K may suit everyday room lighting. The module requires a properly installed, enclosed setup.
Summary
The 20 W LED ceiling light module with a diameter of 16,5 cm provides a luminous flux of 2050 lm, a wide beam angle and magnetic mounting. A choice of warm 3000 K or neutral 4000 K light is available for use in a compatible ceiling fixture.









Reviews
There are no reviews yet.