Description
Microwave Motion and Dusk Sensor for 230 V Lighting
The microwave motion and dusk sensor helps control lighting without using a traditional switch every time. It responds to motion within the monitored detection zone and activates the connected circuit when preset operating conditions are met. It is a practical solution for hallways, corridors, staircases, or interior entry areas where light is only needed while passing through.
Adjustment of sensitivity, hold time, and dusk threshold allows you to adapt its operation to the surrounding environment. The compact white casing houses the control switches and terminal connectors for installation. The sensor serves as a lighting control accessory, not an independent light source.
Automatic control can reduce instances where lighting remains unnecessarily switched on after leaving a room. The final performance depends on proper selection of luminaires, switching parameters, and mounting location. The device is intended for dry indoor spaces.

Microwave Sensor for Automatic Lighting
The sensor operates based on motion detection. Upon recognizing a moving object, the device can activate connected lighting for a selected duration. This is especially convenient in passageways where users do not want to search for a light switch and then remember to turn it off manually.
The detection range can be set to half or full value, making it easy to adapt the coverage area to the room size. Separate settings allow you to choose the light hold time. As a result, this solution can serve both for a quick walk down a hallway and for a slightly longer stay in a designated area.
The dusk function allows you to condition lamp activation on the ambient light level. You can use the threshold for after-dark operation or disable this function if lighting should respond to motion regardless of daylight. Proper configuration helps prevent unnecessary illumination during bright daylight hours.
The sensor is designed for mains-powered lighting installations. The maximum permissible circuit load must be considered when selecting fixtures. Terminal wiring and electrical installation should be entrusted to a qualified professional, adhering to the requirements of the specific installation.
Product Specifications
- Type: microwave motion sensor with dusk function
- Input voltage: 220–240 V AC, 50/60 Hz
- Maximum load: 100 W
- Standby power consumption: up to 0.5 W
- Range adjustment: 50% or 100%
- Maximum range with ceiling mounting: Ø12 m
- Hold time: 5 s / 60 s / 3 min / 10 min
- Dusk sensor: 30 lx threshold or disabled
- Detection frequency: 5.8 GHz ± 75 MHz
- Sensor signal power: below 0.3 mW
- Ceiling mounting height: 2.5–5 m
- Operating temperature: from −25°C to +60°C
- Protection rating: IP20
Product Dimensions
- Width: 5 cm
- Height: 2.5 cm
- Depth: 3.5 cm
- Estimated weight: 0.1 kg
Why Choose This Motion Sensor?
- Switches on connected lighting upon detecting motion in the designated area.
- Dusk threshold allows you to adjust operation according to daylight intensity.
- Operating time adjustment adapts control to how the room is used.
- Two range settings help limit the detection area.
- Compact body can easily be incorporated into electrical installation designs.
- Automatic operation reduces the need for manual lamp switching.
Who Is This Product Suitable For?
The sensor is intended for anyone looking to automate lighting in an indoor hallway, staircase, or room entrance. At home, it can facilitate movement after dark, while in commercial spaces, it controls lighting in frequently used passageways. Its application depends on proper circuit design and load capacity.
It offers the greatest benefit where lights should turn on for a specified time and then shut off automatically. The dusk function further helps limit operation when there is sufficient daylight. The installation should be tailored to the room layout so that detection corresponds to actual user needs.
The product is not suitable for locations exposed to direct contact with water. Prior to mounting, it is necessary to verify the specifications of connected luminaires and ensure adequate space for the accessory within the installation.
Summary
The microwave motion and dusk sensor allows you to automate compatible indoor lighting. Adjustable range, hold time, and dusk threshold make it easy to adapt control to a specific zone. Installation should be carried out in compliance with electrical installation safety standards.



Reviews
There are no reviews yet.