Description
Black Outdoor LED Floodlight 50 W 4000 K IP65 with PIR Sensor
The LED floodlight with PIR motion sensor is a functional light fitting designed to illuminate the surroundings of homes, garages and utility areas. The built-in detector responds to detected movement, allowing it to switch on the lighting automatically where needed. This is a practical solution for entrances, gates or passageways where reaching for a conventional switch is not always convenient.
The black housing made of metal and plastic complements contemporary façades, fences and architectural features. The integrated LEDs emit neutral white light that supports visibility during everyday activities. The unit is designed for mains connection, and installation and connection to the power supply must comply with safety requirements.
The IP65 protection rating provides protection against dust and water jets. This makes the fitting suitable for typical outdoor applications, but not for immersion. The floodlight can also provide additional illumination in selected utility rooms where a wide beam angle is required.

LED Floodlight with PIR Sensor for Façades and Driveways
The built-in LED module has a power rating of 50 W and a colour temperature of 4000 K. Neutral white lighting is useful at building entrances, around garages and in outdoor utility areas. The 120° beam angle allows a relatively broad area to be illuminated, rather than just a single decorative focal point.
The lighting specifications include 4500 lumens measured over 120° and 4800 lumens measured over 360°. When planning the installation, the mounting height, beam direction and surface type should be taken into account. The actual lighting effect depends on the position of the floodlight and any surrounding obstructions.
PIR motion detection helps switch the light on automatically within the area monitored by the sensor. However, this fitting is not dimmable: the detector is responsible for detecting movement, rather than continuously adjusting the light intensity. In practice, it is important to position the floodlight so that its bright light does not shine directly into windows or the eyes of people passing by.

Product Specifications
- Type: outdoor LED floodlight with PIR sensor.
- Power: 50 W.
- Light colour: neutral white 4000 K.
- Luminous flux: 4500 lm (120°) / 4800 lm (360°).
- Beam angle: 120°.
- Protection rating: IP65.
- Motion sensor: yes, PIR.
- Dimmable: no.
- Voltage: 230 V / 50 Hz.
- Colour rendering: CRI 80.
- LED lifespan: 30 000 hours.
- Energy efficiency class: F.
- Materials: metal and plastic.
- Colour: black.
Product Dimensions
- Width: 19,3 cm.
- Height: 20,4 cm.
- Depth: 3,2 cm.
- Gross weight: 0,63 kg.

Why Choose an LED Floodlight with a Motion Sensor?
- PIR sensor – automatic response to movement within the monitored area.
- Neutral white light – functional lighting for the area around the building.
- Wide beam distribution – helps illuminate a larger area.
- IP65 protection – suitable for outdoor use in conditions exposed to rainfall.
- Built-in LED – no need to purchase a separate bulb.
- Black housing – an understated colour that complements modern façades.
- Mains powered – a continuous power supply from a suitable electrical installation.
Who Is This Product Suitable For?
The floodlight is an option for owners of homes and commercial premises who want to illuminate an entrance, driveway, area around a garage or access route. Its automatic response to movement can be convenient in places where people frequently pass through for short periods. It can also complement other lighting points around the property.
Before installation, it is advisable to plan the sensor’s detection area, the mounting height of the fitting and the wiring route. Check that the floodlight will be directed towards the intended area without unnecessarily illuminating neighbouring rooms and properties. It is not a substitute for specialist emergency lighting.
Summary
The black LED floodlight with PIR sensor combines neutral white, wide-angle lighting with automatic motion detection. Its IP65 protection allows it to be used around buildings and in utility areas. It is a solution for places where lighting should switch on when movement is detected.









Reviews
There are no reviews yet.