Description
Twin LED Work Lights on Tripod, 2 × 50 W, 4000 K
The twin LED work lights on a tripod help provide convenient workplace lighting in a garage, workshop or on a construction site. Two black heads are mounted on the crossbar of a yellow folding stand. This allows light to be directed towards different parts of the space without permanently mounting the lights on a wall.
Two 50 W floodlights form a set for illuminating a larger work area. The integrated LED sources emit neutral 4000 K light, useful for technical and renovation work where clear visibility of tools and work surfaces is essential.
The product includes a complete set of two light fittings mounted on a tripod, rather than just a bracket or a single floodlight. It operates from a 230 V power supply; the cable is visible in the manufacturer’s photographs.

Tripod Work Lights for Garage and Renovation Tasks
The folding tripod legs provide a base for positioning the lighting in the desired location. The frame can be folded for storage or transport and then set up again beside the workstation. Adjustable head direction helps direct the beams towards areas that require additional illumination.
The neutral light colour is suitable for minor car repairs, equipment installation or workshop tasks. The two heads can illuminate adjacent sections of a room, allowing the setup to be adjusted to the task currently being performed.
The metal stand has a yellow finish, while the floodlight housings are black. The light fittings are made of aluminium and glass, with metal components. This set has a functional, industrial appearance and can be used both indoors and for outdoor work under suitable conditions.
The IP44 protection rating indicates protection against splashing water. It does not permit submerging the lights or leaving electrical connections without suitable protection. During use, ensure that the tripod is positioned securely and that cables are routed safely.

Product Specifications
- Type: twin LED work lights on a folding tripod
- Light sources: 2 integrated LED floodlights
- Power: 2 × 50 W LED (100 W total)
- Power supply: 230 V
- Light colour: neutral 4000 K
- Luminous flux: 2 × 4300 / 5000 lm in the data feed (values do not distinguish between the fitting and the module)
- Beam angle according to specification: 110°
- CRI: 81
- Average LED lifespan: 20 000 hours
- Non-replaceable light sources; no bulbs required
- Dimmable: no
- Protection rating: IP44
- Materials: aluminium, glass, metal
- Colours: yellow tripod and black light fittings
- Included: tripod with two floodlights
Product Dimensions
- Catalogue dimensions of the set from the data feed: 88 × 81 × 88 cm
- The unfolded frame is shown in a separate technical drawing
- Gross weight: 3,20 kg
- Net weight: 2,57 kg

Why Choose These Work Lights?
- Two LED heads allow more than one part of the workstation to be illuminated.
- The tripod can be positioned and moved without permanent installation.
- Folding legs make the frame easier to store after use.
- The neutral light colour is suitable for technical tasks.
- Pivoting mounts help adjust the direction of the light.
- The LED sources are integrated and require no separate bulbs.

Who Is This Product Suitable For?
In a garage, the set is useful for repairs, vehicle maintenance and organising equipment. The two lights can illuminate the work area from a single tripod position. In a workshop, this makes it easier to move between work areas without installing additional ceiling lights.
During renovation, the portable frame allows a section of wall or floor to be illuminated, depending on the current stage of the work. When used outdoors, installation requirements must be followed and the power supply must be protected from moisture.

Before starting work, unfold the tripod on a stable surface, check the mountings and route the cable so that it does not create a tripping hazard. Careful positioning of the lighting makes the set more convenient to use.

Folding Tripod and Light Positioning
The dimensional drawing helps assess the proportions of the unfolded frame and plan the workspace. Before repositioning the tripod, disconnect the power supply, then check the legs, cables and the mounting of both heads once it is in place.

Summary
The twin LED work lights on a yellow and black tripod provide practical lighting for garages, workshops and renovation tasks. Two adjustable heads, neutral light and a folding frame make it easy to prepare a workstation without permanently mounting the lights.









Reviews
There are no reviews yet.