Description
Square Driveway Ground Light GU10 INOX 12 cm IP67
The square GU10 driveway ground light with an INOX steel finish is designed for discreet installation in paved surfaces around the home. The top panel features four visible screws and a central, round light aperture covered with glass. The rest of the housing sits below ground level, giving the part visible from above a neat, geometric form.
The metallic front can be paired with patio slabs, paving blocks and modern entrance steps. Stainless steel and glass give the light an understated appearance, suitable for highlighting pathway edges and selected architectural features.
This light has one socket for a replaceable GU10 bulb. No light source is included, so its colour temperature and brightness are selected when putting together the installation. These small lights can be arranged in a regular row or used individually in a selected area of the garden.

GU10 IP67 Driveway Ground Light for Recessed Installation
The product operates on a mains supply of 230 V / 50 Hz. It requires correct electrical installation and a suitably selected GU10 bulb. A replaceable light source allows the lighting effect to be adjusted later without replacing the entire fitting. Bulbs must be purchased separately.
The IP67 protection rating indicates a high level of enclosure sealing against dust and water under the test conditions specified for this rating. This allows the fitting to be considered for outdoor lighting; however, in areas accessed by vehicles, the construction must also withstand the loads expected on that surface.
The front of the fitting measures 12 × 12 cm, and its overall height is 13,5 cm. When planning installation, allow for sufficient space below the surface and proper water drainage around the housing. Correct seating in the paved surface is important for the stability and durability of the entire installation.
The combination of round glazing and a square steel panel creates a distinctive design feature. The light can highlight the entrance area, greenery or part of a façade, but the final lighting range and direction depend on the selected bulb and installation method.

Product Specifications
- Type: driveway ground light, recessed installation in paved surfaces
- Light source: 1 × GU10, replaceable
- Bulb included: no
- Power supply: 230 V / 50 Hz
- Protection rating: IP67
- Colour: inox / stainless steel
- Material: metal and glass
Product Dimensions
- Width: 12 cm
- Depth: 12 cm
- Height: 13,5 cm
- Gross weight: 0,6 kg

Why Choose the GU10 INOX Ground Light?
- The square INOX panel complements modern paved surfaces and paving blocks.
- The GU10 light source can be selected to suit the required colour temperature and brightness.
- IP67 protection supports outdoor use of the fitting.
- The steel front and glass create a minimalist appearance.
- The dimensional drawing helps plan the space required for installation.
- The bulb alone can be replaced without having to select a new light fitting.
Who Is This Ground Light Suitable For?
This fitting is suitable for lighting projects around residential pathways, entrances and paved garden areas where discreet lighting points within the surface are desired. The round glazing set into a square front complements simple, orderly layouts.
Before installation in an area subject to vehicle traffic, select and verify the fitting’s load-bearing capacity against the expected loads. The IP67 rating alone concerns enclosure sealing and does not specify mechanical resistance to vehicles driving over it.
Summary
The square GU10 INOX driveway ground light combines a stainless steel front, glass and a high IP67 protection rating. It can provide a subtle lighting feature around a building without a tall, protruding housing.
It is designed for those who wish to select their own GU10 bulb and create a focused lighting effect along a pathway or near an entrance.









Reviews
There are no reviews yet.