Description
IP65 light fitting set, 2 × 120 cm, with reflector and 36 W 4000 K LED tubes
The IP65 2 × 120 cm light fitting set includes a housing with a reflector and two LED tubes rated at 18 W each. The neutral 4000 K light is suitable for a workspace, garage, back room or utility room. Unlike an empty housing alone, this set includes light sources compatible with the designated T8 G13 sockets.
The total power of the tubes is 36 W, and the luminous flux is 2 × 1850 lm. The elongated fitting with a clip-on transparent diffuser is 127 cm long. Its IP65 protection rating makes it suitable for installation in appropriately prepared locations where dust and elevated humidity are present.

Complete 4000 K weatherproof LED set for utility lighting
The housing is designed to accommodate two 120 cm LED tubes positioned in parallel. An additional reflector helps direct the light onto the area in use, while the diffuser separates the tubes from the surrounding environment. This solution is suitable for rooms where functional, uniform lighting and the ability to keep the fitting clean are priorities.
T8 G13 light sources are included. They emit neutral white light at 4000 K and have a colour rendering index of CRI 82. The declared service life is 15 000 hours, and the tubes have a beam angle of 270°. Energy efficiency class F applies to the light sources included in the set.
The lighting is designed for a 230 V / 50 Hz supply, with single-ended power supplied to the LED tubes. The fitting must be connected correctly and the cable entry sealed in accordance with the installation requirements. The HIPS body and PS diffuser have a grey finish.

Product specifications
- Type: weatherproof light fitting set with reflector
- Light sources included: 2 LED tubes
- Tube length: 120 cm each
- Base: T8 G13
- Power: 2 × 18 W (36 W total)
- Luminous flux: 2 × 1850 lm
- Colour temperature: 4000 K, neutral
- Single-ended power supply to the light sources
- Voltage: 230 V / 50 Hz
- Protection rating: IP65
- CRI: 82
- Tube beam angle: 270°
- Service life: 15 000 hours
- Tube energy efficiency class: F
- Materials: HIPS and PS
- Housing colour: grey
Product dimensions
- Overall fitting length: 127 cm
- Width: 9,6 cm
- Height: 6 cm
- Weight: 1,2 kg
- Mounting spacing shown in the drawing: 86 cm
- Number of fittings in the set: 1, equipped with 2 tubes

Why choose the 2 × 120 cm weatherproof LED light fitting set?
- Complete set of light sources — two 18 W LED tubes are already included with the product.
- Reflector — a component designed to make effective use of the light output.
- Neutral white 4000 K — light suitable for functional spaces.
- IP65 protection — protection against dust and water jets.
- 127 cm length — allows illumination of a longer section of the workstation.
- Transparent diffuser — an additional protective cover for both LED tubes.
Who is this product suitable for?
The complete set is useful for installing lighting in a garage, shop back room, workshop or another utility space. Two tubes provide a higher luminous flux than a single 18 W light source, while the weatherproof housing separates them from the surrounding environment.
This is one fitting with two tubes, rather than a set of two separate fittings. The connection must accommodate single-ended LED light sources and meet IP65 sealing requirements. Installation of this mains-powered device should be carried out by a suitably qualified person.
Frequently asked questions about the 120 cm weatherproof light fitting set
Are LED tubes included in the set?
Yes. The set includes one fitting with a reflector and two 120 cm T8 G13 tubes. Each tube is rated at 18 W with a luminous flux of 1850 lm, and both emit neutral 4000 K light.
What are the overall dimensions of the fitting?
The housing is 127 cm long, 9,6 cm wide and 6 cm high. It is therefore slightly longer than the 120 cm tubes themselves. The mounting spacing indicated in the diagram is 86 cm.
Is the fitting suitable for dusty and damp locations?
Yes, the IP65 rating indicates protection against dust and water jets when correctly installed. The electrical connection, diffuser closure and mounting must be completed in accordance with the device’s intended use.
Summary
The grey 2 × 120 cm weatherproof light fitting with a reflector and two 18 W LED tubes provides a complete set for planning utility lighting. It combines 4000 K light, IP65 protection and a full set of T8 G13 light sources.









Reviews
There are no reviews yet.