Description
L-Shaped Centre Feed Connector for Single-Phase Track 2.0
The L-shaped centre feed connector for single-phase track 2.0 allows two compatible track sections to be joined at a right angle. It enables the ceiling installation to change direction and helps you plan lighting that follows the layout of the room. It is a component of a single track system, rather than a standalone light fitting.
The connector has an L-shaped aluminium body, with ends that slide into the corresponding track profiles. Black and white versions are available. Both finishes have the same outline, specifications and intended use, allowing the colour to be matched to the visible parts of the installation and the light fittings.
An integrated centre feed is a structural feature of this model. Before installation, select tracks and accessories that meet the same system standard and connect them in accordance with the requirements for mains electrical installations. The IP20 protection rating indicates suitability for dry indoor spaces.

L-Shaped Connector for the Single-Phase Track System 2.0
The key feature of this accessory is its compatibility with 1 m and 2 m tracks in the 2.0 system. The connector allows the track to turn a corner and helps you run lighting in different directions, for example in a living room, kitchen or hallway. It should not be selected solely on the basis of a similar-looking connection, as other generations of the system may use a different design.
The connector fits 1 m and 2 m single-phase tracks in the 2.0 system, but does not fit the older 1,5 m track in version 1.0. Before purchasing, check the system markings on any components already installed. This helps avoid situations where the profile does not physically fit the connector end or does not provide a proper connection.
The single-phase system operates at approximately 230 V and a frequency of 50 Hz. The connector should be treated as part of the electrical installation, so assembly and connection should be carried out in accordance with the instructions and safety requirements. The design is not intended for exposure to weather or locations exposed to water.
The simple angled body can visually complement the long lines of the aluminium tracks. Choosing black helps maintain a consistent installation on a dark ceiling, while the white version suits light-coloured profiles. This solution is intended for planned corners in the layout, rather than for joining tracks in a straight line.

Product Specifications
- Type: L-shaped connector for lighting tracks
- System: single-phase 2.0
- Function: corner connection and centre feed
- Compatible tracks: 1 m and 2 m in the 2.0 system
- Material: aluminium
- Colours: black, white
- Voltage: approx. 230 V / 50 Hz
- Protection rating: IP20
Product Dimensions
- Width: 10,5 cm
- Depth: 10,5 cm
- Height: approximately 1,8 cm
- Thickness shown in the drawing: 17,5 mm
- Weight: 0,081 kg
- Shape: L-shaped corner

Why Choose This Track Connector?
- Corner layout – allows lighting to run at a right angle, following the room layout.
- Centre feed version – a corner connection with a centre feed function.
- System 2.0 – a connector designed for single-phase tracks measuring 1 m and 2 m.
- Two finishes – black or white to match the profiles used.
- Aluminium – a rigid construction with a low overall height.
- Detailed dimensional drawing – helps plan the position of the corner before installation.
Who Is This Product Suitable For?
The connector is intended for anyone planning a track lighting system in which the tracks need to change direction by ninety degrees. It is useful in living rooms, dining rooms and other dry indoor spaces where the arrangement of the light fittings needs to follow the ceiling layout.
It can also be used to extend a 2.0 installation, provided that the compatibility of all profiles and accessories used has been confirmed. It is not a universal connector for any type of track. In particular, it does not replace accessories for the 1,5 m track in the older 1.0 version.
Summary
The L-shaped connector for single-phase tracks in the 2.0 system joins two compatible sections at a right angle and includes a centre feed function. It is available in black and white. It fits 1 m and 2 m tracks in version 2.0, but does not fit the older 1,5 m track in the 1.0 system.









Reviews
There are no reviews yet.