Description
Black recessed magnetic track 48 V 200 cm – 5 mm system
The black recessed magnetic track is an aluminium rail for creating modern ceiling lighting. It has a straight, elongated body and an internal channel designed to hold compatible lighting components. Perforated flanges on the sides make it easier to secure the profile within a suitably prepared ceiling structure.
The ultra-narrow system channel creates a minimalist lighting appearance. The system designation refers to the mounting channel, rather than the full width of the aluminium rail. Before constructing the ceiling, it is therefore advisable to compare the track cross-section with the dimensions of the planned recess and allow sufficient space for the structure.
The product includes one long, black section of track. The profile itself does not emit light; functional lighting is created by adding compatible LED modules and a suitable power supply arrangement. This type of installation can be planned for a living room, hallway, office or commercial space, with careful attention to the positioning of the lights.

Recessed track for magnetic ceiling lighting
The profile shown in the photographs has a rectangular cross-section, a narrow open channel and side flanges with regularly spaced holes. During installation, the flanges allow the track to be integrated into the ceiling structure. Once the surface has been properly finished, it creates an even, discreet line that serves as the base for the lighting modules.
The low-voltage magnetic system differs from traditional single-phase and three-circuit tracks. This track must not be connected directly to the household mains supply. The power supply, LED modules, connectors and other accessories must be selected for a compatible system, taking into account the electrical requirements of the specific installation.
The aluminium construction provides a rigid mounting base. The black finish can contrast with a light ceiling or complement darker details in the room. Its simple shape makes the track suitable for projects requiring an orderly arrangement of spotlights or compatible linear modules.
The IP20 protection rating indicates suitability for dry indoor spaces. The profile must not be installed in locations exposed to rain, water or direct splashes. The installation method and cable routing should take into account the requirements of the entire installation and electrical safety principles.
Product specifications
- Type: recessed magnetic track
- System: magnetic 5 mm
- System voltage: 48 V
- Included in the offer: 1 aluminium rail
- Lighting modules: selected separately
- Protection rating: IP20
- Colour: black
- Material: aluminium
- Installation: recessed
Product dimensions
- Track length: 200 cm
- Overall profile width: 4,7 cm
- Profile height: approximately 2,1 cm
- Narrow system channel: approximately 5 mm
- Gross weight: 0,80 kg




Why choose a recessed magnetic track?
- Long profile – allows a continuous line of lighting to be planned.
- Perforated flanges – a construction designed for recessed installation.
- Narrow channel – a modern, discreet appearance for the installation.
- Black colour – a geometric detail that suits a wide range of interiors.
- Aluminium construction – a metal base for the entire system.
- Choice of light fittings – allows modules to be matched to the room.
- Recessed installation – a profile integrated into the ceiling surface.
Who is this product suitable for?
The track is suitable for modern residential and commercial interiors where lighting should be as discreet as possible. It can provide a base for several lighting modules along a corridor, above a table or within an office space. Its linear shape helps maintain an orderly ceiling composition.
Before purchasing, check that the light fittings and power supply are compatible with the track system. It is also advisable to plan the width of the mounting opening and the surface finish around the profile carefully. The component itself is designed to work with other lighting parts, rather than to emit light independently.
Summary
For a larger ceiling structure, it is advisable to prepare the module layout, cable route and location of the power supply components in advance. This will help reduce subsequent ceiling alterations and ensure the selection of compatible magnetic components. The track layout should follow the interior design and the installation recommendations for the chosen system.
The recessed magnetic track is a simple, black aluminium profile designed for modern modular lighting. It features perforated flanges, a narrow channel and space for compatible modules. A suitable power supply and lighting components must be selected to create a functional system.









Reviews
There are no reviews yet.