Description
Solar LED Outdoor Light 4000 K IP65 with Motion Sensor and Remote Control
The solar LED outdoor light with motion sensor and remote control is an outdoor lighting fixture with a photovoltaic panel located on the rear of the housing. It combines a light source, rechargeable battery and control system in a single unit. It is suitable for entrances, driveways, garages and areas around buildings where a conventional mains power supply is difficult to install.
Two versions are available, designated by the manufacturer as 100 W and 200 W, differing primarily in size and luminous flux. The smaller version provides 750 lm, while the larger version delivers 1500 lm. Both emit neutral white light at 4000 K, have an IP65 protection rating and feature a housing made of ABS plastic and polycarbonate.
The light can operate automatically after dark or respond to movement. The included remote control allows you to adjust the brightness and select supported programmes. The light is powered by a rechargeable battery charged during the day by the solar panel. When planning the installation location, ensure that the panel receives adequate exposure to daylight.

Solar LED Outdoor Light with Remote Control for Driveways and Gardens
The elongated black fixture features a rectangular LED module at the front, set within a rounded housing. The control section is located beneath it, with a large photovoltaic panel at the rear. The unit is designed for wall or pole mounting using the included bracket and appropriate installation hardware.
The dusk sensor allows the light to switch on automatically when ambient light levels fall. The motion sensor detects activity within a range of approximately 8–10 m and at an angle of 120°. In one mode, the light increases its brightness when movement is detected, then switches to a standby level of approximately 10% brightness after around 15 seconds.
The remote control makes it easy to switch the light on and off and adjust its brightness. Available options include automatic modes, motion-activated modes and timed programmes in which the light operates continuously for a set period before switching to sensor mode. The battery requires approximately 4–6 hours to charge under suitable sunlight conditions. Actual operating time depends on the weather and the selected programme.
The IP65 housing is designed for outdoor use and protects the fixture’s components against dust and water jets. The light can illuminate a building facade, an outbuilding entrance or a section of a private access road. The set includes a bracket for installation on a suitable wall or pole. Installation must be carried out in accordance with the manufacturer’s requirements.




Product Specifications
- Type: outdoor solar LED light
- Versions: manufacturer designations 100 W or 200 W
- Luminous flux: 750 lm or 1500 lm
- Light colour: neutral white 4000 K
- Beam angle: 70° × 140°
- Light source: integrated SMD 2835 LEDs
- Power supply: solar panel and LiFePO4 rechargeable battery
- Sensors: dusk and motion, range 8–10 m, angle 120°
- Control: remote control included
- Protection rating: IP65
- Housing: ABS and PC, black
- Installation: wall or pole mounting
Product Dimensions
- 100 W version: 22,3 × 50,3 × 6,2 cm; gross weight 2,73 kg
- 200 W version: 26,9 × 60,8 × 6,2 cm; gross weight 4,10 kg
- Net weight 100 W: 2,17 kg
- Net weight 200 W: 3,33 kg
- Recommended installation 100 W: mounting height 3–6 m, pole Ø48 mm
- Recommended installation 200 W: mounting height 3–8 m, pole Ø46–48 mm
- 200 W battery: LiFePO4 3,2 V / 24 000 mAh
- 200 W solar panel: 5 V / 3000 mA
- 100 W solar panel: 5 V / 1800 mA
The 100 W and 200 W designations are the manufacturer’s version names and do not constitute a definitive measurement of actual power consumption. Pay particular attention to the luminous flux of 750 or 1500 lm, overall dimensions and installation conditions.






Why Choose This Solar Outdoor Light?
- Built-in solar panel: charging without a separate mains connection.
- Motion and dusk sensors: automatic control of outdoor lighting.
- Remote control included: programme selection and brightness adjustment.
- Two brightness versions: a choice of 750 or 1500 lm luminous flux.
- IP65: construction designed for outdoor use.
- Wall or pole mounting: bracket and accessories included.
Who Is This Product Suitable For?
The light is intended for owners of properties, outbuildings and areas around buildings who need lighting with an independent solar power supply. It can be used at a garage entrance, on a driveway, along a fence or beside a private access road.
When choosing a version, consider the size of the area and the required luminous flux. You should also check whether the bracket can be securely attached, the installation height and the panel’s access to daylight. Lighting performance may vary depending on the battery’s charge level.
Summary
The IP65 solar LED outdoor light combines a solar panel, neutral white 4000 K light, a motion sensor and convenient remote control. Two versions with different luminous flux levels and sizes are available to suit the space around your building. Before installation, select the appropriate version and an installation location with good exposure to sunlight.









Reviews
There are no reviews yet.