Description
LED Power Supply 24 V 30 W 1,25 A IP67
LED Power Supply 24 V 30 W 1,25 A IP67 is a power supply for LED lighting with a rated voltage of 24 V DC. The unit has a maximum power output of 30 W and an available output current of 1,25 A. The power supply is designed to power compatible LED strips and lighting modules.
Its main feature is an enclosure with an IP67 protection rating. This rating is useful in installations where electrical components require protection against dust and contact with water. The unit can be used in properly installed indoor and outdoor systems.
The metal construction has an elongated shape. Space must be allowed for the housing and cables, and the connections must be made correctly. The light sources must be suitable for a voltage of 24 V.

24 V IP67 LED Power Supply for Installations Exposed to Moisture
IP67 protection distinguishes this model from typical open-frame power supplies intended for dry rooms. A high protection rating may be required in LED installations operating in more demanding conditions. The sealing of the entire installation also depends on the correct protection of cables and connections.
The power supply delivers current to devices requiring a voltage of 24 V. If several LED strip sections are to share one unit, their power consumption must be added together and compared with the 30 W limit. It is also necessary to check that the installation remains within the output current limit of 1,25 A.
The metal housing measures 20,2 cm in length, 3,4 cm in width and 2,3 cm in height. These dimensions allow the position of the unit to be planned within a service enclosure. A suitable mounting location should also accommodate cable routing and the operating conditions of the unit.
The 24 V voltage means it cannot be used as a direct replacement for a 12 V power supply. When replacing an existing unit, the power requirements of the connected device must be established. An incorrect choice may cause the installation to operate improperly.

Product Specifications
- Type: LED power supply
- Maximum power: 30 W
- Output voltage: 24 V DC
- Output current: 1,25 A
- Protection rating: IP67
- Housing material: metal
- Number of units: 1
Product Dimensions
- Housing length: 20,2 cm
- Housing width: 3,4 cm
- Housing height: 2,3 cm
- Gross weight: 0,307 kg
The dimensions refer to the body of the unit, and the weight refers to one unit including packaging.

Why Choose This LED Power Supply?
- IP67 rating – protection required in demanding environmental conditions.
- 24 V DC output – for compatible LED strips, modules and light bars.
- Maximum power of 30 W – a defined load limit for the project.
- Output current of 1,25 A – a key parameter when selecting devices.
- Metal housing – a construction designed for lighting installations.
- Elongated housing dimensions – can be taken into account when planning installation.
Who Is This Product Suitable For?
The power supply is intended for individuals and installers assembling a 24 V LED lighting system in a location requiring a more tightly sealed unit. It is suitable for outdoor or indoor illumination, provided that the installation conditions meet the electrical and mounting requirements.
It is also a solution when replacing an existing power supply where the exact specifications of 24 V, 30 W and 1,25 A are required. Before connection, the maximum load and the method of protecting the cables must be checked. Electrical work should be carried out by a qualified person.
Frequently Asked Questions About the LED Power Supply
Can the unit be used outdoors?
IP67 indicates a high level of protection against dust and water ingress. Outdoor use is possible in a properly designed installation, but the cables and their connections must also be adequately protected.
Will it power a 12 V LED strip?
No, this unit has a 24 V DC output. Connecting a light source requiring 12 V would be incompatible with its rated voltage. A power supply with the voltage specified for the particular strip or module must be selected.
What is the maximum power of the connected devices?
The nominal limit of the unit is 30 W. Before installation, the requirements of all connected devices must be assessed, and the voltage and current ratings specified for the power supply must not be exceeded.
Summary
The 24 V DC LED power supply with a power output of 30 W and an IP67 protection rating enables compatible lighting modules to be powered in installations requiring enhanced enclosure protection. Voltage, permissible power and correctly protected connections are key factors when selecting the unit.









Reviews
There are no reviews yet.