Description
Mean Well LPH-18-24 LED Power Supply – 24 V 18 W 0,75 A IP67 Sealed
The sealed 24 V 18 W 0,75 A IP67 LED power supply is a small switching power supply for lighting installations requiring a constant voltage of 24 V. It combines a sealed plastic housing with compact dimensions, allowing it to operate in suitably prepared LED backlighting systems.
The device offers a rated power of 18 W and a maximum output current of 0,75 A. It supplies power to loads whose specifications fall within these limits. It is neither a light bulb nor a colour controller — it powers separate modules, strips or other compatible loads.
The IP67 rating indicates that the housing provides protection against dust and the effects of water within the limits of this standard. The sealed housing itself does not replace the protection required for cables, connections and other installation components. Safe connection requires appropriately selected cables and a suitable load.

Constant-voltage LED power supply in a sealed housing
When installing lighting, it is important to match the power supply to both the voltage of the strips or modules and their total power consumption. The constant output voltage of this converter allows compatible LED products to operate without using an unsuitable power source.
The potted plastic housing protects the electronic components and allows the device to be used in demanding conditions. Cable ends require particular attention: their connections must be protected appropriately for the environment and the type of installation.
The converter features short-circuit, overload, overvoltage and thermal protection. These systems support its correct operation, but do not replace proper electrical installation design, suitable cable cross-sections or compliance with maximum load limits.
The Class II design is intended for compatible power systems. Fanless operation reduces the number of moving components; the power supply dissipates heat through its housing into the surrounding environment. The required cooling conditions must be maintained during installation.
Product specifications
- Type: Constant-voltage LED power supply
- Output power: 18 W
- Output voltage: 24 V DC
- Output current: 0,75 A
- Input range: 180–264 V AC / 254–370 V DC
- Ingress protection rating: IP67
- Housing: Plastic
- Insulation: Class II
- Protection: Short circuit, overload, overvoltage, overheating
- Cooling: Passive
Product dimensions
- Length: 14 cm
- Width: 3 cm
- Height: 2,2 cm
- Device weight: approximately 0,175 kg
Why choose the 18 W IP67 LED power supply?
- Compact dimensions – easier selection of an installation location.
- 24 V DC output – compatibility with suitable low-voltage installations.
- Sealed IP67 housing – protection of the electronics against dust and water.
- Constant voltage – designed for compatible LED modules.
- Protective features – assistance in the event of an unsuitable load or temperature.
- Plastic housing – protection for the device’s electronic components.
Who is this product suitable for?
This power supply is intended for installers and anyone assembling small lighting systems operating at 24 V. It can power compatible LED modules in indoor installations and appropriately protected outdoor systems.
Before purchasing, calculate the total load, match the voltage requirements of the connected devices and determine the installation conditions. The housing’s IP67 rating does not mean that all connections in the completed circuit are automatically waterproof.
Frequently asked questions about the 24 V 18 W LED power supply
Is this power supply compatible with every LED strip?
No. The strip or module must require a constant voltage of 24 V, and its load must not exceed the device’s rated specifications. The presence of LEDs alone does not ensure electrical compatibility.
Can the IP67 housing be used in a damp location?
The housing has IP67 protection, but its connections and cables must also be properly protected. Installation conditions must be suited to the environment and the requirements for the electrical installation.
Does the power supply require a fan?
No, this design uses passive cooling. However, suitable conditions for heat dissipation must be provided in accordance with the installation requirements.
What voltage is available at the output?
The device supplies a constant voltage of 24 V. This voltage must be distinguished from the input voltage on the mains side for which the device is designed.
Summary
The sealed LED power supply with a plastic housing delivers 24 V at a power of 18 W and a current of 0,75 A. Its IP67 rating allows it to form part of an appropriately prepared low-voltage installation. Before installation, select connected devices that match the voltage and permissible load.









Reviews
There are no reviews yet.