Description
Mean Well XLG-320-V-A LED Power Supply – Selectable 12/24 V 216/312 W IP67 Silver
Silver LED power supply with selectable 12/24 V output, 216/312 W and IP67 protection is a switching power supply for technical applications with a choice of 12 V or 24 V output voltage. At the 12 V setting, it provides 216 W at 18 A, while at 24 V, the unit delivers 312 W and 13 A. A single housing therefore supports two voltage standards used in LED systems.
The silver metal housing with an IP67 protection rating restricts dust and water ingress into the electronics. The elongated design with flying leads is intended for integration into a technical system. The selectable output voltage allows the unit to be matched to the connected load without purchasing separate power supplies for different voltages.
The factory setting for this version is 24 V. For use in a 12 V system, the voltage must be set accordingly before connecting any loads, following the instructions. The different maximum power ratings at each voltage should be taken into account when designing the installation.

12 and 24 V LED Power Supply for High-Power Technical Systems
The electrical input supports a range of 100–305 V AC or 142–431 V DC. This allows the power supply to be selected for installations providing voltage within the specified limits. Connected loads must be compatible with the current output setting, and their total power consumption must not exceed the capacity of the selected operating mode.
The unit uses active power factor correction (PFC). Typical efficiency is 93%, making it easier to assess energy losses in the power supply when selecting components for the complete system. Short-circuit, overload and thermal protection provide additional protection under the specified abnormal operating conditions.
The metal housing measures 24,6 cm in length, 7,7 cm in width and 3,95 cm in height. The high protection rating of the housing does not replace correctly made wiring connections. Ambient conditions, the mounting method and operation within the limits specified for the unit are important during installation.
The photograph shows the housing used in this series; the version designation on the label may differ. The model offered has selectable 12 V and 24 V output, providing 216 W and 312 W respectively. This is a single power supply with a selectable operating mode, rather than a set of two units.
Product Specifications
- Type: Switching LED power supply with selectable output voltage
- Output voltage: 12 V DC or 24 V DC
- Power at 12 V: 216 W
- Power at 24 V: 312 W
- Current at 12 V: 18 A
- Current at 24 V: 13 A
- Input voltage: 100–305 V AC or 142–431 V DC
- Protection rating: IP67
- Material: Metal
- Colour: Silver
- Typical efficiency: 93%
- Protection: Short circuit, overload, overheating
Product Dimensions
- Length: 24,6 cm
- Width: 7,7 cm
- Height: 3,95 cm
- Catalogue weight: 1,45 kg
Why Choose an LED Power Supply with Selectable 12/24 V Output?
- Two voltage settings – 12 V and 24 V in a single unit.
- Power matched to the output – 216 W at 12 V and 312 W at 24 V.
- IP67 sealing – housing with protection against dust and water.
- Metal housing – compact construction for technical systems.
- Electrical protection – overload, short-circuit and thermal protection.
- 93% efficiency – a specified parameter for calculating loads and losses.
Who Is This Product Suitable For?
The power supply is intended for technical LED lighting systems operating at 12 V or 24 V. With the appropriate configuration, installers can use the same design in projects employing different voltage standards. Selecting the unit requires checking the rated voltage of all connected loads.
This model is suitable for applications where high output power and an IP67 metal housing are important. During installation, it must be taken into account that the power rating is 216 W in 12 V mode and 312 W in 24 V mode. The voltage must be switched in accordance with the instructions and safe working practices.
Summary
This silver LED power supply combines selectable 12/24 V output with an IP67 housing. It provides 216 W at 12 V and 312 W at 24 V, allowing it to be matched to two types of installation. Select the appropriate setting before starting the LED system.









Reviews
There are no reviews yet.