Description
12 V 150 W IP67 LED Power Supply in a Graphite Housing
The 12 V 150 W IP67 LED power supply in a graphite housing converts mains voltage into the constant output voltage required to operate a lighting installation. It supplies 12 V DC and a current of 12,5 A, allowing it to power compatible LED strips, linear lighting components and technical backlighting with a combined power consumption matched to its capacity.
The aluminium housing with an IP67 protection rating protects the electronics against dust and water to the extent specified by its ingress protection rating. This makes the unit suitable for more demanding conditions than open power supplies intended exclusively for dry indoor spaces. However, installation must also include protection for the cable connections.
The graphite version has an elongated body, cables extending from both ends and mounting brackets. This allows the unit to be positioned in a prepared installation location with access to a suitable power source and low-voltage loads.

12 V 150 W IP67 LED Power Supply for Lighting Installations
The unit is designed to work with LED installations requiring a constant output voltage. Its power and current ratings make it easier to match the power supply to the total load of the connected devices. In applications with multiple lighting sections, proper power distribution is essential, so the power supply forms part of a technical system rather than functioning as a standalone light source.
The input voltage ranges from 180 to 264 V AC, and the mains frequency is 50/60 Hz. The constant 12 V output allows operation with loads of the same voltage rating. When designing the installation, check the compatibility of the other system components, including cables and controllers.
The aluminium body is enclosed and fitted with input and output cables. This design differs from a perforated power supply with an exposed terminal block. Its actual dimensions should be taken into account before choosing a mounting location, particularly in enclosed spaces where available room is limited.
The IP67 rating applies to the power supply housing; connectors, cable ends and the entire installation require protection appropriate to the operating conditions. The power supply itself does not replace a properly designed electrical installation and a suitably protected connection.

Product Specifications
- Type: constant voltage LED power supply
- Power: 150 W
- Output voltage: 12 V DC
- Output current: 12,5 A
- Input: 180–264 V AC, 50/60 Hz
- Protection rating: IP67
- Material: aluminium
- Colour: graphite
- Operating temperature range: from −10°C to +40°C
- Connections: cables at both ends of the housing
- Intended use: 12 V DC LED lighting
Product Dimensions
- Body length: 22,4 cm
- Width: 6,5 cm
- Height: 2,5 cm
- Gross weight: 0,7 kg

Why Choose the 150 W IP67 LED Power Supply?
- Constant output voltage – supplies power to LED loads designed for 12 V DC.
- Current capacity – supports loads drawing up to 12,5 A.
- Sealed housing – the IP67 rating allows use in conditions with increased humidity to be considered.
- Aluminium body – provides mechanical protection for the electrical components.
- Pre-fitted leads – cables extend directly from the unit.
- Elongated shape – suits prepared mounting locations with limited width.
Who Is This Product Suitable For?
This power supply is intended for installers and those designing linear, decorative, advertising and furniture lighting with loads operating on DC voltage. Selecting the appropriate power rating allows a single unit to be matched to a specific number and length of connected LED components without using several lower-capacity power supplies.
The IP67-rated body is particularly useful where the unit may be exposed to dust or moisture. Please bear in mind that the housing’s ingress protection rating does not define the protection of all electrical connections. Cable selection, installation and protection should be appropriate to the installation conditions.
Summary
The graphite LED power supply provides 150 W of power, a 12 V DC output and an IP67-rated aluminium housing. It is intended for compatible lighting installations requiring constant voltage. Before making your selection, compare the load specifications and the available mounting space.









Reviews
There are no reviews yet.