Description
LED Power Supply 12 V 60 W IP67 in a Metal Housing
The LED power supply 12 V 60 W IP67 in a metal housing converts mains voltage into a constant 12 V DC output voltage. Its rated output current of 5 A and power of 60 W allow it to power suitably selected LED tapes, strips and modules requiring a voltage of 12 V. The unit is enclosed in an elongated metal housing with attached leads.
The IP67 protection rating ensures that the housing is sealed against dust and water under the conditions specified in the standard. This is useful in installations where the device may operate in environments with higher humidity. However, all cable connections and other components of the system must be protected independently of the power supply itself.
The input voltage ranges from 100–240 V AC. With its constant-voltage output, the power supply can form part of a complete LED lighting installation, provided that the combined power consumption of the connected devices is appropriately matched.

Metal LED Power Supply 12 V for LED Tapes and Modules
The power supply is designed for devices that require a regulated 12 V DC voltage. When selecting a unit, add together the power consumption of all connected devices and compare it with the unit’s power rating. For LED installations, leaving a power reserve is beneficial; with a maximum rating of 60 W, a sensible design may allow for a load of around 50 W, depending on operating conditions.
The metal housing with a ribbed profile helps dissipate heat during operation. The leads extending from the housing allow the device to be connected to the planned circuit. The power supply does not replace an LED controller, dimmer or light colour adjustment system; its function is to deliver the appropriate supply voltage.
The housing measures 18 cm in length, 7,2 cm in width and 4,4 cm in height. When planning installation, allow additional space for the leads, their sealed connections and heat dissipation. The product has a grey metal housing and mounting holes for securing it to a suitably prepared surface.
The mains connection must be carried out by a person with the required qualifications. Even with an IP67 housing, the safety of the entire installation depends on the correct selection of components, cable routing and load conditions.

Product Specifications
- Type: constant-voltage AC/DC LED power supply.
- Output voltage: 12 V DC.
- Rated current: 5 A.
- Rated power: 60 W.
- Input voltage range: 100–240 V AC.
- Housing protection rating: IP67.
- Housing: metal, grey, ribbed.
- Connection: leads on both sides of the housing.
- Application: 12 V constant-voltage LED devices.
- Brightness adjustment: no built-in dimmer.
Product Dimensions
- Length: 18 cm.
- Width: 7,2 cm.
- Height: 4,4 cm.
- Gross weight: approximately 0,80 kg.
- Net weight: approximately 0,79 kg.
- Packaging: 19 × 7,2 × 8,5 cm.
The dimensions refer to the housing, excluding the additional space required for leads and installation.
Why Choose the LED Power Supply 12 V 60 W?
- Constant 12 V DC voltage for compatible lighting devices.
- Power up to 60 W and a rated current of 5 A.
- IP67 housing protecting the unit against dust and water.
- Ribbed metal construction to support heat dissipation.
- Factory-fitted leads extending from both ends of the device.
- Dimensions of 18 × 7,2 × 4,4 cm to help plan integration into an enclosure.
- Input range of 100–240 V AC for appropriately designed installations.
Who Is This Product Suitable For?
This solution is suitable for linear lighting installers and users seeking a 12 V DC power supply for systems that require a housing with enhanced sealing. The power supply can support suitably selected lengths of LED tape and LED modules, provided that their current consumption and voltage requirements match the unit’s specifications.
Before installation, check the power consumption of the connected devices, the sealing of connections, heat dissipation conditions and the mounting location. The IP67 rating of the housing alone does not automatically make the entire lighting system waterproof.
Summary
The LED power supply 12 V 60 W IP67 is a sealed metal unit with a 5 A output and dimensions of 18 × 7,2 × 4,4 cm. It is suitable for use as part of properly protected 12 V constant-voltage systems with an appropriately matched load.









Reviews
There are no reviews yet.