Description
24 V 150 W IP20 metal LED power supply for LED strips
The 24 V 150 W LED power supply is a metal power supply module for lighting equipment requiring a voltage of 24 V. It is intended for correctly designed LED strip and module installations where matching the power supply capacity to the actual load is essential. The product consists of a single power supply, not a set with an LED strip or light fitting.
The model features an elongated silver housing with ventilation openings and terminals for electrical connections. Its rated power of 150 W and current of 6,25 A help match the device to the planned system. The actual installation load must be considered together with the required power reserve, rather than assuming continuous operation at maximum capacity.
The IP20 protection rating indicates use indoors in dry rooms and does not provide protection against water. The power supply requires a suitably protected installation location that provides ventilation and protects the terminals against accidental contact.

24 V metal power supply for LED modules and strips
A stable voltage suitable for the LED installation is an essential criterion when selecting a power supply for a light strip or compatible module. When choosing a power source, check the voltage required by the connected equipment, its total power consumption and the connection method. A 12 V device must not be connected to a 24 V power supply.
The perforated metal housing facilitates air circulation around the power supply components. During installation, avoid covering the openings and follow the device’s technical instructions. Adequate heat dissipation and the absence of moisture are relevant to use within furniture and technical enclosures.
The elongated module shape is suitable for installation locations that allow the device to be securely mounted and the cables to be routed safely. Before selecting the product, compare its dimensions with the available space, allowing additional clearance for wiring and ventilation. The dimensions below refer to the power supply body itself.
Electrical connections should be made by a suitably qualified installer in accordance with the wiring diagram and terminal markings on the specific unit. The perforated housing does not replace a protective installation enclosure where the mounting location requires additional protection. The power supply is not intended for direct use in environments exposed to splashing water.

Product specifications
- Type: power supply for LED installations
- Output voltage: 24 V
- Rated power: 150 W
- Rated current: 6,25 A
- Housing: metal with ventilation openings
- Material: metal
- Colour: silver
- Protection rating: IP20
- Application: compatible 24 V LED strips and modules
- Number of units: 1 unit
Product dimensions
- Body length: 20 cm
- Body width: 9,8 cm
- Body height: 4,3 cm
- Gross weight: 0,35 kg
Before installation, also check the clearance required for cable routing and device ventilation. The stated dimensions refer to a single power supply.

Why choose this LED power supply?
- 24 V output – for powering installations designed for this voltage.
- 150 W power rating – makes it easier to select the device for a specific load.
- Metal body – a construction intended for technical installation.
- Ventilation openings – facilitate heat dissipation into the surrounding air.
- Specified dimensions – allow the installation space to be checked in advance.
- Clearly stated specifications – power, current and voltage help compare models.
Who is this product suitable for?
This power supply can form part of a furniture, decorative or technical lighting installation if the LED light sources used require 24 V and the design provides an appropriate power reserve. Correct selection allows independent lighting to be installed, for example, within shelving units, recesses or runs of LED strips.
Before use, it is necessary to compare the specifications of the connected equipment and the power supply, the connection method, the required ventilation and protection against contact. An IP20 device should operate in a dry location in accordance with the applicable electrical installation regulations. It must not be used as a universal voltage source for arbitrary electrical devices.
Frequently asked questions about the 24 V LED power supply
Is the power supply compatible with every LED strip?
No. The strip must be designed for a 24 V power supply, and its total power consumption must remain within the planned load conditions. Voltage compatibility and electrical requirements must be checked before connection.
Can the power supply be installed in an enclosed unit?
The installation location must provide ventilation conditions suitable for the device and protection for the terminals. The ventilation openings must not be covered, and the device must not be used in a damp environment without appropriate protection.
What are the power rating and current capacity?
This model has a power rating of 150 W and a rated current of 6,25 A at a 24 V output. The installation must allow for an appropriate power reserve and account for the actual load of the connected equipment.
Summary
The 24 V 150 W metal LED power supply is designed for use with compatible lighting installations. Ventilation openings, clearly stated specifications and the provided dimensions make it easier to prepare a suitable installation location. Before use, confirm the electrical requirements and ensure safe operating conditions.









Reviews
There are no reviews yet.