Description
Black 24 V 60 W IP67 LED power supply for LED strips
The black 60 W IP67 LED power supply is a device designed to supply power to compatible 24 V lighting sources. Unlike ventilated open-frame enclosures, it has a sealed metal body with cables extending from both ends. This design can be useful in installations requiring greater enclosure resistance to environmental conditions.
The device has rated specifications of 60 W, 24 V and 2,5 A. Its suitability depends primarily on whether the LED strips or modules being powered are compatible with the output voltage and on their combined power consumption. Before selecting a power supply, calculate the load of each section and allow a power reserve instead of continuously operating at maximum capacity.
The product shown includes one power supply unit. Strips, modules, junction boxes and other installation components are not included in this offer. The photograph shows a black rectangular body with technical markings and two sets of cables.

Sealed IP67 enclosure in a 24 V power supply
The IP67 protection rating indicates that the enclosure is sealed against dust and specified conditions of water exposure under the IP classification. This does not replace proper protection of the connections at the cable ends. The entire installation must be designed with the mounting location and component specifications in mind, rather than relying solely on the power supply rating.
The metal surface of the enclosure allows some heat to dissipate into the surroundings. It must not be completely insulated with material that impedes cooling. Installation requires suitable thermal conditions and secure mounting, and cables should be routed so that they do not exert mechanical forces on the body.
Connected devices must be designed for a 24 V power supply. Strips marked as 12 V are not compatible with this model. When designing longer lighting runs, voltage drops and appropriate cable cross-sections must also be considered, rather than relying solely on the total power consumption.
Before commissioning, read the input and output markings on the enclosure and follow the technical documentation. Connection to the mains and protection of the cables should be carried out by a qualified electrician. The high IP rating of the body does not mean that any cable connection is automatically watertight.

Product specifications
- Type: 24 V LED power supply
- Rated power: 60 W
- Output current: 2,5 A
- Voltage: 24 V
- Enclosure protection rating: IP67
- Material: metal
- Colour: black
- Connection: cables extending from the body
- Number of items: 1 power supply
Product dimensions
- Length: 15,9 cm
- Width: 5 cm
- Height: 2,5 cm
- Weight: 0,80 kg
The dimensions 159 × 50 × 25 mm refer to the main enclosure. Additional space must be allowed for cables and installation accessories.
Why choose this power supply?
- IP67 enclosure – increased protection of the body against dust and water exposure.
- 60 W power rating – specifications that allow the power supply to be matched to a specific load.
- 2,5 A current – a clearly specified output parameter.
- Compact design – no exposed terminal blocks directly on the body.
- Metal finish – an enclosure with a technical appearance.
- Output cables – make it easier to plan a connection in a separate, suitably protected location.
Who is this product suitable for?
This power supply may be considered for lighting terrace structures, signage or other projects using compatible 24 V LED sources where an enclosure with enhanced sealing is required. However, operating conditions and connection protection must be suitable for the entire installation. The product is not a ready-to-connect kit that requires no electrical work.
Correct device selection, protective measures, a power reserve and mechanical protection of the cables are essential during installation. Verification is best entrusted to an installer familiar with the requirements of the specific location.
Frequently asked questions
What does IP67 mean?
The IP67 rating defines the resistance of the enclosure itself to dust and water under test conditions. It does not automatically cover electrical connections made outside the power supply.
Can a 12 V LED strip be connected?
No. The power supply output is intended for 24 V devices, and strips powered by 12 V require a different model.
What is the current rating of this power supply?
The rated value is 2,5 A at a power of 60 W and a voltage of 24 V. The load design must allow for an appropriate reserve.
Summary
The 60 W model with a black, sealed enclosure is a component for 24 V LED installations requiring an appropriate protection rating. Ensure professional installation, protected connections and compatibility of all connected devices with the power supply specifications.








Reviews
There are no reviews yet.