Description
12 V 60 W 5 A IP44 LED Power Supply in a White Housing
The 12 V 60 W 5 A IP44 LED power supply in a white housing is designed for compatible strips, modules and other low-voltage lighting components. Its purpose is to supply a constant voltage of 12 V to devices with suitable power requirements. The power supply features an elongated plastic body and output leads for connection to the installation.
An output power of 60 W and a current of 5 A allow power provision to be planned for a suitably selected load. The IP44 rating indicates limited resistance to small solid objects and water splashes in accordance with the standard, but does not mean the unit is waterproof. The installation location must be selected to suit the device’s operating conditions.

LED Power Supply Specifications and Operation
The constant 12 V output makes it easier to match the power supply to compatible LED lighting circuits. The requirements of all connected devices should be added together before connection. Correct cable selection and consideration of current draw along the power supply runs are particularly important.
The enclosed white housing separates the electronics from the surrounding environment and makes the device easier to integrate into a technical system. The unit measures approximately 15,5 × 5,5 × 3,2 cm. This allows space for the power supply itself and sufficient room for the cables to be planned before installation.
The IP44 rating allows the power supply to be considered for conditions where a housing with basic IP20 protection is insufficient. However, the protection provided by the body does not remove the need to protect cable terminations or maintain an appropriate distance from areas particularly exposed to water.
Power supply without colour adjustment – the device is neither a light fitting nor a light colour controller. An additional compatible controller may be required to adjust white colour temperature, colours or brightness. Disconnect the mains supply during installation work and follow electrical safety procedures.


Product Specifications
- Type: Constant voltage LED power supply
- Power: 60 W
- Output voltage: 12 V DC
- Output current: 5 A
- Housing protection: IP44
- Colour: White
- Material: Plastic
- Application: Compatible 12 V lighting systems
Product Dimensions
- Length: 15,5 cm
- Width: 5,5 cm
- Height: 3,2 cm
- Gross weight: 0,19 kg


Why Choose the 60 W IP44 LED Power Supply?
- 12 V DC output – designed for compatible devices and LED strips.
- 60 W power – supports a suitably selected load.
- 5 A current – clear specifications for circuit design.
- IP44 housing – protection against specified exposure to splashing water.
- White body – an attractive protective cover for electronic components.
- Compact proportions – easier planning of the installation space.
Who Is This Product Suitable For?
The power supply may be suitable for furniture and decorative lighting installations where the LED strips or modules used require a voltage of 12 V. It is intended for people selecting installation components and installers of low-voltage systems.
Before purchasing, check the total power and current requirements of the connected devices, the connection types and the installation location. Particular attention should be paid to humidity conditions and proper protection of all wiring.
Summary
The white 60 W LED power supply provides an output voltage of 12 V and a current of 5 A. Its IP44 housing and compact dimensions allow a suitably protected installation to be planned. Check the load and electrical requirements of all components before installation.









Reviews
There are no reviews yet.