Description
Mean Well XLG-150-12-A LED power supply – 12 V 150 W 12,5 A IP67 metal housing
The 12 V 150 W 12,5 A IP67 LED power supply with metal housing is a switching power supply for compatible LED lighting installations, delivering an output voltage of 12 V. The metal housing with an IP67 protection rating protects the device against dust ingress and water under the conditions specified for this rating.
The device is designed for systems requiring a substantial output load. Constant output power allows it to supply appropriately selected LED modules and circuits within this model’s output specifications. The power supply is not a light source; it works with separate installation components.
The converter uses active power factor correction (PFC) and includes a protective earth lead. Its metal body and construction designed for lighting installations allow it to be considered for both indoor applications and appropriately configured outdoor installations.

Sealed LED power supply for high-load 12 V installations
This model accepts a wide input voltage range and provides output specifications suitable for powering compatible LED loads. The dust- and moisture-resistant housing makes it easier to select equipment for installations where the power supply may be exposed to adverse ambient conditions.
The metal construction protects the electronic components and provides a mounting base for the device. The input and output leads are part of the power supply, while the choice of connection method and installation protection must take into account the specifications of all components used.
Active PFC helps correct the power factor on the input side. Compliance with SELV requirements concerns the safety of the low-voltage circuit and is important when designing a suitable LED system. The robust metal housing distinguishes this construction from lightweight power supplies with open housings.
Using the device requires selecting an appropriate load and observing the operating conditions. The housing protection rating does not replace protection for the installation’s wiring or connections; individual electrical connection points should have protection appropriate to the operating environment.
Product specifications
- Type: LED switching power supply
- Output power: 150 W
- Output voltage: 12 V DC
- Output current: 12,5 A
- Input voltage: 100–305 V AC / 142–431 V DC
- Protection rating: IP67
- Housing: Metal, silver
- Circuitry: Active PFC
- Safety: SELV, protective earth lead
- Series image: The image shows the housing used in this series; the version designation on the label may differ — we supply model XLG-150-12-A.
Product dimensions
- Length: 18 cm
- Width: 6,3 cm
- Height: 3,55 cm
- Device weight: 0,8 kg
Why choose the 12 V 150 W IP67 LED power supply?
- Substantial rated power capacity – 150 W allows the device to be selected for compatible systems with significant power consumption.
- Suitable output voltage – 12 V matches LED installations requiring this supply voltage.
- High level of housing protection – IP67 provides protection against dust ingress and specified water exposure.
- Metal enclosure – the robust body protects the electronics and forms part of the device’s construction.
- Active PFC correction – reduces adverse effects associated with the input power factor.
- SELV safety circuit – helps match the device to an appropriately designed low-voltage system.
Who is this product suitable for?
The power supply is intended for installers and those assembling LED systems with specifications compatible with the device’s output. It is suitable for projects requiring a metal housing with a high ingress protection rating and sufficient current to power the connected loads.
It can operate in indoor and outdoor installations, provided that the other components and connections have been appropriately selected for the conditions. The choice of a specific power supply should be based on the voltage required by the connected loads, their combined load and the input specifications.
Summary
The LED switching power supply with metal housing provides a 12 V output with a power rating of 150 W and a current of 12,5 A. Its IP67 housing and active PFC circuitry are distinguishing features of its construction. Choose it for a compatible lighting installation, taking into account the required protection for electrical connections.









Reviews
There are no reviews yet.