Description
Mean Well XLG-200-12-A LED Power Supply – 12 V 192 W 16 A IP67 Metal Housing
The 12 V 192 W 16 A IP67 LED power supply with metal housing powers compatible lighting installations requiring a constant voltage. The metal housing protects the electronic components, while the IP67 protection rating indicates increased resistance to dust and contact with water under specified conditions.
This is a switching power supply from the Mean Well XLG series, using constant voltage and constant current technology. Version A provides output current adjustment via a potentiometer located inside the housing. The final choice of device should take into account the specifications of the particular LED system, rather than just the total power consumption of the connected loads.
The metal body is designed for fanless cooling. The power supply features active power factor correction, a protective earth conductor and electrical protection features that support operation in a correctly installed system.

Sealed Power Supply for Higher-Power LED Installations
Extensive lighting systems require a device that powers suitably selected LED modules and strip sections. The low-voltage output can only be used with loads that have compatible specifications. Checking the load and voltage drops in the wiring remains an important part of system design.
The IP67-rated housing protects the interior of the converter against dust and exposure to water in accordance with the requirements of this rating. This allows it to be considered when designing installations with increased exposure to external factors, provided that cable connections are properly protected.
The power supply combines voltage and current regulation technologies and allows the current setting to be adjusted in version A. This is not a light colour control function, nor is the product a kit including light fixtures. Active PFC improves power consumption characteristics on the mains supply side, while the housing design helps dissipate heat into the surrounding environment.
The metal construction can be beneficial in decorative and industrial installations requiring higher power output. The device should not operate without adequate airflow, appropriate cable protection and electrical compatibility with the other components.
Product Specifications
- Type: CV+CC LED switching power supply
- Output specifications: 12 V, 192 W, 16 A
- Input voltage: 100–305 V AC / 142–431 V DC
- Protection rating: IP67
- Material: Metal
- Adjustment in version A: Output current potentiometer
- Protection features: Short circuit, overcurrent, overvoltage and thermal protection
- Circuit: Active PFC
- Version designation: The photograph shows the series housing; the version designation on the label may differ — we ship model XLG-200-12-A.
Product Dimensions
- Length: 19,9 cm
- Width: 6,3 cm
- Height: 3,55 cm
- Device weight: 0,85 kg
Why Choose an IP67 LED Power Supply?
- High output capacity – enables compatible installations with higher loads to be powered.
- Metal housing – protects the device and helps dissipate heat.
- IP67 protection rating – provides protection against dust and water in accordance with the standard.
- Current adjustment – allows the setting to be adjusted within the range specified for version A.
- Active PFC – supports appropriate current draw characteristics on the mains supply side.
- Multi-stage protection – limits the effects of short circuits, overloads and overheating.
- Passive cooling – uses the metal construction without a fan.
Who Is This Product Suitable For?
The device meets the needs of LED system installers and contractors who require suitable output power, voltage and housing resistance to environmental conditions. It can be considered for indoor lighting and correctly installed outdoor systems.
Before connection, calculate the total current drawn by the loads, select appropriate cable cross-sections and ensure that cable connections are properly protected. The settings of version A should be adjusted by a person familiar with the electrical requirements of the installation.
Summary
The LED switching power supply with a 12 V output delivers 192 W of power and 16 A of current. Version A features current adjustment, an IP67 metal housing and active PFC. Choose it for a suitably matched lighting installation and check the requirements of the connected loads before installation.









Reviews
There are no reviews yet.