Description
Mean Well LPV-100-24 LED Power Supply – 24 V 100,8 W 4,2 A IP67 in a White Housing
The 24 V 100,8 W 4,2 A IP67 LED power supply in a white housing is a constant-voltage switching device for compatible decorative installations and lighting elements. It is enclosed in a long, white plastic housing with cables extending from both ends. The output provides the DC voltage required by appropriately selected loads.
The housing has an IP67 ingress protection rating. Protection of electronic circuits against dust and water expands the product’s application possibilities in installations where limiting contact with moisture is important. This does not eliminate the need to adequately protect cable connections outside the housing.
The power supply operates without a fan and is cooled by the flow of surrounding air. Short-circuit, overload and overvoltage protection are provided. The device is a single power supply unit, rather than a complete set with an LED strip or light fitting.

LED Power Supply for Low-Voltage Decorative Systems
A power supply circuit with a constant output voltage is enclosed in the sealed plastic housing. This allows the installer to connect compatible LED loads after checking their combined power requirements and connection specifications. Compatibility with low-voltage circuits makes it easier to plan a decorative lighting installation.
Separate input and output cables extend from opposite ends of the housing, separating the mains circuit from the load. The power supply does not require an active cooling fan, and its housing has no ventilation openings. During operation, conditions that allow natural heat dissipation must be maintained.
The device is equipped with protection against abnormal electrical conditions. These protective features are built into the design, but do not replace checking the load, properly insulating connections and ensuring a suitable mounting method. This is essential both for indoor installations and for use in locations exposed to increased humidity.
Product Specifications
- Type: constant-voltage switching power supply
- Rated power: 100,8 W
- Output voltage: 24 V DC
- Output current: 4,2 A
- Input voltage: 90–264 V AC or 127–370 V DC
- Ingress protection rating: IP67
- Housing: white, plastic
- Cooling: natural convection
- Protection: short-circuit, overload and overvoltage
- Series photograph: The photograph shows the housing used in this series; the version designation on the label may differ — we ship model LPV-100-24.
Product Dimensions
- Length: 19 cm
- Width: 5,2 cm
- Height: 3,7 cm
- Power supply weight: 0,61 kg
- Contents: 1 unit
Why Choose This LED Power Supply?
- Constant output voltage – enables compatible LED loads to be powered.
- Highly sealed housing – the IP67 rating protects the interior against dust and water exposure under specified conditions.
- Cables on both sides – provide separate input and output leads for the device.
- Insulating plastic body – the enclosed housing shields the electronic components.
- Passive cooling – the design requires no fan.
- Electrical protection – the circuits respond to short circuits, overloads and excessive voltage.
Who Is This Product Suitable For?
The power supply is suitable for setting up decorative lighting systems and signalling circuits in which the loads require a constant voltage. It will be useful for installers selecting a single power supply unit for compatible sections of an installation.
Making the right choice requires checking the total power consumption and ambient conditions. The ingress protection rating of the housing alone does not guarantee the installation’s resistance to environmental exposure if the cable connections are unprotected.
Summary
This white switching power supply in an enclosed housing combines a 24 V output, IP67 protection, passive cooling and electrical protection. Choose it for a compatible system when you need a stable power supply and a dust-resistant housing with properly made connections.









Reviews
There are no reviews yet.