Description
Double-Ended Connector for 10 mm RGB LED Strips with Cable
The double-ended connector for 10 mm RGB LED strips with cable joins two sections of multicolour RGB strip. A flexible cable runs between the light-coloured ends, allowing the connection to span two points instead of requiring one continuous strip.
The connector supports strips with a width of 10 mm and is suitable for joining sections separated by a corner. The flexible cable bridge makes it easier to route the connection where the lighting changes direction.
The four coloured wires between the ends correspond to the multichannel configuration of an RGB strip. This is not a two-contact connector for single-colour LED strips. Check the contact arrangement of both sections before connecting them.

Double-Ended RGB Connector for Routing Strips Around Corners
The two ends of the connector accommodate separate strip sections. A cable runs between them, so the two sections do not need to touch directly. This arrangement is useful for decorative lighting routed across different surfaces.
The component has PVC housings and four wires with insulation in different colours. The small ends can be accommodated when planning space for the strip connection, without using a separate light fitting or a larger housing.
The connector has no LEDs, receiver or control circuitry of its own. Changes in colour and brightness depend on the selected strip and the other RGB equipment. The connector carries the connection between compatible sections of the installation.
This accessory is intended for indoor installations. Matching the strip width and the arrangement of its four contacts is essential. A similar appearance in other multicolour connectors does not guarantee an identical electrical connection.
Product Specifications
- Type: double-ended connector for RGB strips
- Strip width: 10 mm
- Wires: 4 coloured conductors
- Housing material: PVC
- Colour: white, light-coloured housing
- Application: connecting two RGB strip sections indoors
Product Dimensions
- Overall length / depth: 17,8 cm
- Width: 1,4 cm
- Height: 0,5 cm
- Gross weight: 0,013 kg
Why Choose This RGB Strip Connector?
- Two ends – connect strip sections on either side of the cable.
- Easier changes of direction – the connection can be routed near a corner.
- Four conductors – the configuration corresponds to a multicolour RGB strip.
- Compact housings – make positioning the connection easier.
- One technical function – the accessory joins sections and does not need to be treated as a light fitting.
- Matched to the width – the connector is designed for 10 mm strips.
Who Is This Product Suitable For?
This accessory is designed for decorative RGB strip installations where the lighting runs across several surfaces. It allows a connection to be made around a bend without sharply bending the strip itself at the transition.
When assembling the installation, check contact compatibility, strip type and strip width. The controller and power supply remain separate components of the system. The connector is needed solely to make the connection.
Summary
The double-ended RGB connector allows two sections of 10 mm strip to be joined via a flexible cable. It is suitable for corners and other changes in the direction of decorative lighting. Choose it for a strip with a compatible contact arrangement.








Reviews
There are no reviews yet.