Description
Three-way T connector for 8 mm 2-pin SMD/COB LED strips 5 A
Three-way T connector for 8 mm 2-pin SMD/COB LED strips 5 A is used to connect sections of LED strip in a T-shaped branch. This plastic component is designed for 8 mm wide strips with two contacts and is used in low-voltage lighting systems.
When a line of light needs to run in three directions, the appropriate connector shape allows this layout to be created without soldering. The snap-fit mechanism is designed to connect compatible strips while maintaining their contact arrangement.
The product can be used with suitable SMD and COB LED strips operating on a 12 V or 24 V power supply. The maximum current is 5 A, and the IP20 rating means it is intended for use in dry indoor spaces, without contact with water.

Three-way snap-fit LED connector for branching strips
Lighting layouts running in several directions require a branch from a single line. A T-shaped connection allows three compatible strip sections to be joined at one point. Its design differs from a straight connector or an L-shaped corner connector, so the shape should be matched to the planned branch.
The snap-fit housing eliminates the need for soldering when joining suitably matched strips. Individual sections can therefore be joined using a ready-made connector that serves as a connecting component. It does not replace the light source, controller or power supply.
The two-contact arrangement limits use to compatible LED strips. In addition to the width, the arrangement of the contact pads must be checked, as strips with a similar appearance do not necessarily have the same electrical configuration.
The plastic housing has a low profile. Its compact dimensions allow this component to be accommodated in a small space allocated for the branch. The lack of protection against water requires use in a dry environment.

Product specifications
- Type: T-shaped snap-fit connector
- Function: Branching LED strip connections
- Strip type: SMD / COB
- Strip width: 8 mm
- Contacts: 2-pin
- Voltage: 12 V / 24 V
- Current: 5 A
- Material: Plastic
- Connection: Solderless
- Ingress protection rating: IP20
Product dimensions
- Width: 1,7 cm
- Depth: 1,7 cm
- Height: 0,5 cm
- Gross weight: 0,002 kg


Why choose a three-way T connector for LED strips?
- Branching at a single point – the T-shaped layout allows three compatible strip sections to be joined.
- No soldered contacts – the snap-fit closure connects matching contact pads.
- Recognisable geometry – the distinctive layout sets this component apart from straight and corner connectors.
- For two strip technologies – suitable for compatible SMD and COB strips.
- Defined number of connections – the 2-pin configuration makes it easier to check contact pad compatibility.
- Low-voltage support – the specifications allow this component to be used in a compatible 12 V or 24 V circuit.
- Small dimensions – the compact plastic body takes up little space in the lighting system.
Who is this product suitable for?
The T-shaped connector is intended for anyone creating LED strip branches where a single run needs to split into several sections. It can form part of an interior lighting installation when the strips used have suitable contacts and power supply specifications.
It is a choice for projects requiring a three-way connection without soldering. Electrical compatibility, the maximum permissible current and environmental conditions must be taken into account, as the IP20 rating means the connector cannot be treated as a rain-resistant accessory.
Summary
The plastic snap-fit T connector allows compatible SMD and COB LED strips to be branched without soldering. It is designed for two contacts, low voltage and dry indoor spaces. Choose it for a three-way installation layout after checking the compatibility of the strip being used.









Reviews
There are no reviews yet.