€12 TO GET STARTED – CLAIM YOUR DISCOUNT
€0

White 8 mm LED Strip Connector with Flexible Cable

€5 incl. VAT

In stock: 100 sztuk
Delivery cost from €14
Carry-in service At extra cost
Warranty 2 years
Return 14 days
Payments Secure payment

Shipping information

  • Delivery time: 2–4 working days from receipt of payment.
  • We will let you know the exact delivery time in advance.
  • Your furniture is carefully packed so that it arrives in perfect condition.
  • Current lead time: 2–4 working days (product available)

Contact

If you would like to know exactly when your delivery will arrive, write to us or give us a call:

SKU: EKL-1734 Category:
Product images and descriptions may have been created or edited using artificial intelligence (AI) tools or other production software.

Ask about this product

Please provide an email address or a phone number (at least one).

Preferred contact method

Description

Double-Ended Connector for 8 mm LED Strips with Cable

The double-ended LED strip connector with cable is used to connect two separate sections of furniture lighting. It has two light-coloured clamps positioned at the ends of a flexible cable, allowing the connection to run across a section of cabinetry where there is no room for an illuminated strip.

The flexible double-ended connector helps route the connection around a cabinet corner, a shelf edge or a small obstacle along the lighting path. The strip does not need to be bent sharply, and the ends can be positioned on either side of the crossing point. This solution makes it easier to maintain a tidy furniture appearance.

The component is designed for narrow LED strips with a compatible electrical configuration. Before installation, the contact layout and polarity must be matched to the selected strip. The connector itself does not emit light and does not include a power supply or controller.

Double-ended LED strip wire connector with white clips and red-black wire

Double-Ended LED Connector for Shelf and Cabinet Lighting

In kitchen cabinetry, shelving units or wardrobes, lighting is often distributed across several surfaces. A single roll of LED strip cannot always run continuously from start to finish. The wired connector allows an electrical bridge to be created between separate sections, providing a convenient cable route behind a shelf or through a service gap.

There are two white clamps at the ends, with a flexible cable featuring red and black insulation between them. This design differs from a rigid corner connector: the cable also allows the connection to be routed where the strip sections do not meet at a right angle. This is useful for irregular shelf arrangements.

A well-planned installation allows the cable itself to be concealed from view, leaving only an even line of illuminated LEDs on the visible surface. This makes it possible to separate the lighting for upper and lower shelves, route around a bracket or run the strip across a hidden part of the furniture without creating an additional illuminated section.

Switch off the power before attaching the clamps. Check that the contact pads at the end of the strip are accessible and that the connector type is compatible with the strip’s construction. The cable should not be under tension, and the connection should be protected against accidental pulling and water. The product is intended for indoor use.

Product Specifications

  • Type: double-ended wired connector for LED strips
  • Purpose: connecting two strip sections
  • Compatible strip width: 8 mm
  • Construction: two clamps on a cable
  • Cable: two-core, red and black
  • Clamp material: PVC
  • Clamp colour: white
  • Place of use: indoors
  • LED module: not included with the product
  • Power supply: not included with the product

Product Dimensions

  • Width: 1,2 cm
  • Height: 0,5 cm
  • Total connector length: 17,8 cm
  • Gross weight: 0,008 kg

Why Choose a Double-Ended Connector with Cable?

  • Two clamps – allow the ends of separate strip sections to be connected.
  • Flexible bridge – provides greater freedom when routing the connection across a gap.
  • Practical application – routes around structural furniture components.
  • Narrow ends – easier to position in confined spaces.
  • Light colour – matches white shelves and mounting profiles.
  • No additional LEDs – the connector transfers power without extending the visible line of light.

Who Is This Product Suitable For?

This accessory is useful for anyone installing lighting in several parts of a piece of furniture, for example in a wardrobe with separate levels or a display cabinet with partitions. The flexible cable section is convenient where access to cabinetry components is limited and routing the strip across a decorative surface is best avoided.

Before purchasing, check the photograph of the connector ends and compare their construction with the selected strip. Matching widths alone does not guarantee electrical compatibility; the number of conductive tracks and the arrangement of connection points also matter. Multicolour strips and non-standard modules may require a different type of accessory.

Summary

The double-ended wired connector helps maintain continuity in an LED installation between separate surfaces. Two clamps and a flexible bridge make it suitable for cabinets, shelves and other furniture installations in dry conditions.

Delivery information

Availability status In stock
Lead time 2–4 working days
from receipt of payment
ManufacturerEko-Light Milagro

The delivery time shown is an estimate and may change depending on the product's availability from the manufacturer.

Information

Weight0.008 kg
Dimensions17.80 × 1.20 × 0.50 cm

Reviews

There are no reviews yet.

Be the first to review “White 8 mm LED Strip Connector with Flexible Cable”

Your email address will not be published. Required fields are marked *