Description
LED Strip 12 V 60 LED/m 100 m IP20 – Reel
LED Strip 12 V 60 LED/m 100 m IP20 – Reel is a single long roll of self-adhesive SMD 2835 lighting strip, designed to create decorative lighting in dry indoor spaces. Each metre features 60 LEDs, and the entire reel contains 100 metres of strip. Three fixed white light options are available: warm 3000 K, neutral 4000 K and cool 6500 K.
One roll allows several independent lighting sections to be planned for furniture, shelves, ceiling structures or recesses. The strip is 8 mm wide and 2 mm thick, which should be taken into account when selecting a profile and installation location. The strip can be cut at the marked points every 5 cm, provided the appropriate connection requirements are followed.
The price is for a complete 100 m reel. It is not a price per metre and does not refer to one hundred separate kits. This model operates at 12 V DC; installation requires a suitably selected power supply and accessories appropriate for the planned section lengths.

LED Strip 12 V 100 m – Warm, Neutral or Cool Light
The 3000 K option produces warm white light, suitable for highlighting wooden elements and softly illuminating fitted units. The neutral 4000 K colour creates a more subdued effect without a pronounced golden tint. The 6500 K option provides cool white light that can complement modern, bright interiors.
The selected colour temperature remains fixed: these are three separate product variants, rather than an RGB or CCT strip. When designing several lines of light, using one colour temperature helps maintain a consistent appearance throughout the installation. According to the technical specifications, power consumption is 2,5 W per 0,5 m, with a luminous flux of 250 lm for the same section.
This corresponds to 5 W and 500 lm per metre. When all 100 m are used, the combined power consumption of the sections is 500 W, but an installation of this length should not be powered from one end without an appropriate design. The installation must be divided into sections, with suitable power supply capacity, cable cross-sections and connection points specified.
The strip has an IP20 protection rating, which means it offers no protection against water. It should therefore be used in dry surroundings and compatible profiles. Dimming capability depends on selecting a suitable LED controller, rather than using any mains dimmer.


Product Specifications
- Type: self-adhesive SMD 2835 LED strip
- Length: one 100 m reel
- Voltage: 12 V DC
- LED density: 60 LED/m
- Light colour: warm 3000 K / neutral 4000 K / cool 6500 K
- Power consumption: 2,5 W / 0,5 m, equivalent to 5 W/m
- Luminous flux: 250 lm / 0,5 m, equivalent to 500 lm/m
- Beam angle: 120°
- Protection rating: IP20
- Dimmable: yes, with a compatible controller
- Energy efficiency class: F
- Colour rendering: CRI above 80
- Declared lifespan: 20 000 h
Product Dimensions
- Unrolled strip length: 100 m (10 000 cm)
- Strip width: 0,8 cm
- Strip thickness: 0,2 cm
- Distance between cutting points: 5 cm
- Reel packaging dimensions: approximately 38 × 38 × 1,6 cm
- Weight of one reel: approximately 0,9 kg
The strip dimensions describe the unrolled material. The price and weight refer to one complete reel, rather than one metre.


Why Choose a 60 LED/m LED Strip on a 100 m Reel?
- One 100 m roll – a supply of material for preparing multiple sections within a single project.
- 60 LEDs per metre – evenly spaced light points.
- Three light colour options – a choice of warm, neutral or cool white.
- Cutting points every 5 cm – adjust the length to suit the planned lighting lines.
- Narrow 8 mm strip – suitable for selected LED profiles.
- Dimming with a compatible controller – allows brightness adjustment in a suitably configured system.
- 12 V DC voltage – for use in appropriately designed low-voltage installations.


Who Is the 100 m 12 V LED Strip Suitable For?
This product is intended for those creating longer indoor accent lighting installations. It can be used to add a decorative finish to fitted units, run lines of light beneath shelves or highlight furniture edges. A complete reel makes it easier to plan several sections with the same colour temperature.
Projects covering such a substantial length require a properly arranged power supply and appropriate management of cable and controller loads. The IP20 rating limits use to dry locations without exposure to water. The strip is not a complete, standalone powered lighting system.

Summary
The 12 V LED strip with 60 LEDs per metre is supplied on a single 100 m reel. Warm, neutral or cool white options allow the character of the light to be selected, while cutting points every 5 cm make it possible to prepare sections of the required length. The product requires a properly designed power supply and use in conditions suitable for its IP20 rating.









Reviews
There are no reviews yet.