Description
PABLA 4031 Recessed Driveway Light
The PABLA 4031 recessed driveway light is a round fitting designed for installation in paving or directly in the ground, with a metal front and an integrated installation housing. Its design brings light to ground level without placing a tall light above the surface.
The fitting is intended for hard surfaces such as paving blocks, concrete, glazed tiles, terracotta tiles and decking, as well as installation directly in the ground. It is suitable for driveways, access paths to the house, patios and garden paths.
The replaceable E27 bulb allows the light source type and colour temperature to be matched to the surroundings. The stainless steel ring and tempered glass create a clearly defined, durable front for the fitting.

Round Recessed Light for Driveways, Paths and Paved Surfaces
The round front makes it easy to position the lights at even intervals along a driveway or path. Recessing the fitting into the surface preserves the clear layout of the paving and illuminates selected points without protruding posts.
The high IP67 protection rating indicates a dust-tight enclosure and protection against the effects of temporary immersion in water under the test conditions for this rating. Proper drainage and preparation of the installation site remain essential, particularly when installing in the ground.
The body is made of cast aluminium, the ring of 304 stainless steel and the lens of tempered glass. The polycarbonate installation housing allows the fitting to be set into a prepared opening in accordance with the installation instructions.
The light source is a single replaceable E27 bulb with a maximum wattage of 75 W and a 230 V power supply. Select a light source suited to the purpose of the area, keeping the maximum permitted bulb wattage in mind.

Product Specifications
- Model: PABLA 4031.
- Type: round recessed driveway light.
- Body: cast aluminium.
- Ring: 304 stainless steel.
- Lens: tempered glass.
- Installation housing: polycarbonate.
- Light source: 1 × E27, maximum 75 W.
- Power supply: 230 V.
- Protection rating: IP67.
Product Dimensions
- Height: 23 cm.
- Diameter: 21 cm.
- Weight: approximately 1 kg.
The front, with a diameter of 21 cm, creates a distinct point of light in the surface, while the body extends 23 cm into the installation space. When planning installation, allow for the entire installation housing, including the portion below the visible ring.

Why Choose the PABLA 4031 Recessed Driveway Light?
- Recessed ground installation allows the surface to be illuminated without a tall post.
- IP67 protection guards against dust and the effects of temporary immersion.
- Tempered glass provides a strong protective cover for the light source.
- The 304 stainless steel ring gives the front a metallic finish.
- The replaceable E27 bulb allows the colour temperature to be matched to the space.
- The round shape makes it easy to arrange the lights at regular intervals along a path or driveway.
Who Is This Product Suitable For?
This fitting is an option for lighting a driveway, a passage beside the house, a patio or a garden path. It works well wherever a point of light needs to remain low and integrated into the surface.
The fitting can be used as a single accent or in a series of lights marking the route of an access path or the edge of a driveway. The choice of E27 bulb allows the light source to be matched to the intended effect.
Frequently Asked Questions About the PABLA 4031 Recessed Driveway Light
Which bulb can be used?
The PABLA 4031 recessed driveway light uses one E27 bulb rated at up to 75 W and a 230 V power supply. The bulb is replaceable, allowing its type and colour temperature to be selected to suit a driveway, path or other outdoor space.
What does the IP67 protection rating mean?
The IP67 protection rating of the PABLA 4031 recessed driveway light indicates a dust-tight enclosure and protection against the effects of temporary immersion in water under test conditions. The installation site must be prepared to allow water to drain away in accordance with the installation instructions.
What materials is the fitting made from?
The PABLA 4031 recessed driveway light has a cast aluminium body, a 304 stainless steel ring, a tempered glass lens and a polycarbonate installation housing. The metal front protects the lens, while the installation housing is the part set into the prepared opening.
What are its dimensions?
The PABLA 4031 recessed driveway light measures 23 cm in height and 21 cm in diameter. When preparing the installation site, allow for the depth of the body and the space required to position the fitting correctly.
Can it be installed directly in the ground?
The PABLA 4031 recessed driveway light is designed for installation in hard surfaces and directly in the ground. In every case, the opening, a stable base and water drainage must be properly prepared.
Summary
The PABLA 4031 recessed driveway light combines a round front, tempered glass, 304 stainless steel and IP67 protection. Its replaceable E27 bulb and recessed installation make the fitting suitable for driveways, paths and patios.









Reviews
There are no reviews yet.