Description
PABLA 3725 A recessed driveway light
The PABLA 3725 A recessed driveway light is a round fitting designed for installation in a paved surface or directly in the ground. It is suitable for driveway, pathway, terrace and entrance area lighting projects where the light source needs to sit at ground level, without a protruding post.
The body is made of cast aluminium, the ring of 304 stainless steel, the cover of tempered glass and the mounting housing of polycarbonate. The stainless steel ring creates a distinct finish around the glass, while the compact round shape fits easily into the surface layout.
The fitting uses one GU10 bulb with a maximum wattage of 35 W and a 230 V power supply. The replaceable GU10 light source allows the light colour and brightness to be selected to suit the intended application, within the wattage limit specified for the light.

PABLA 3725 A recessed driveway light for driveways and garden paths
The fitting can be recessed into paving blocks, glazed tiles, terracotta tiles, decking or concrete, or installed directly in the ground. This provides a way to introduce a light point beside a walkway or along the edge of a driveway without taking up additional space on the surface.
Tempered glass provides a protective cover for the light source. The IP67 rating indicates dust-tight protection and protection against temporary immersion in water under the test conditions specified for this rating. The IP67 rating is relevant for a fitting installed close to the surface, where it may come into contact with moisture and dirt.
The SU-MA documentation for this model specifies a permissible static load of up to 1 tonne and a dynamic load of up to 1,5 tonnes at a speed of 15 km/h. These specifications help assess the fitting’s suitability for surfaces intended to carry vehicles or other loads.
The metal ring, tempered glass cover and polycarbonate mounting housing each serve a distinct purpose in the construction. When planning the installation, the mounting location and electrical connection must be prepared in accordance with the instructions to ensure that the fitting is correctly recessed into the chosen surface material.


Product specifications
- Type: recessed driveway light
- Colour: inox
- Body: cast aluminium
- Ring: 304 stainless steel
- Glass cover: tempered glass
- Mounting housing: polycarbonate
- Light source: 1 × GU10, max. 35 W
- Power supply: 230 V
- Ingress protection rating: IP67
- Load: static up to 1 t; dynamic up to 1,5 t at 15 km/h
Product dimensions
- Height: 11 cm
- Diameter: 10,4 cm in the SU-MA product feed
- Weight: 1 kg (estimated)

Why choose the PABLA 3725 A recessed driveway light?
- Ground installation – allows lighting to be incorporated into the surface without a post.
- 304 stainless steel ring – gives the outer edge a metal finish.
- Tempered glass cover – protects the light source.
- Replaceable GU10 bulb – allows individual selection of light colour and brightness within the 35 W limit.
- IP67 protection – indicates dust-tight protection and protection against temporary immersion.
- Specified load ratings – help assess the fitting’s suitability for surfaces subjected to loads.
Who is this recessed driveway light suitable for?
This light is an option for illuminating driveways, garden paths, terraces and entrance areas. The round fitting can mark the route of a walkway or highlight the edge of a surface without taking up the space that a freestanding light would require.
The replaceable GU10 bulb allows the light colour to be matched to other lighting points. When choosing the installation location, consideration should be given to the surface material, preparation of the mounting recess and the electrical requirements of the outdoor installation.
Summary
The PABLA 3725 A recessed driveway light is a ground-recessed fitting with an aluminium body, an inox ring, a tempered glass cover and a replaceable GU10 light source. Its IP67 protection and load specifications help with planning its use in outdoor surfaces.









Reviews
There are no reviews yet.