Description
MIX 6725 D recessed driveway light
The square MIX 6725 D recessed driveway light is designed for installation in the ground, providing discreet illumination for selected areas around the home. Its silver front, made from aluminium and stainless steel, creates a geometric accent that complements paving slabs, concrete and paving blocks.
This fitting is suitable for areas where lighting needs to blend into the surface without protruding above it. Tempered glass protects the light source, while the IP67 protection rating allows outdoor use when the installation site is properly prepared and adequate drainage is provided.
The adjustable light direction makes it easier to highlight a path, entrance, plant or architectural feature. The light uses a separate GU10 bulb with a maximum wattage of 50 W, selected to suit the intended lighting effect.

Square recessed light for driveways and pedestrian routes
The square shape complements surfaces with straight dividing lines, such as large slabs or regularly laid paving blocks. The silver surface creates a subtle detail during the day, while after dark the point of light can help mark the course of a path or the edge of a driveway.
Load resistance makes it possible to consider installation in areas used by vehicles, provided that a suitable base is prepared. The permissible static load is up to 1 tonne, and the dynamic load is up to 1,5 t at a speed of 15 km/h. Correct positioning of the fitting and the stability of the surface remain important aspects of installation.
The body is made from aluminium, the ring from 304 stainless steel, the pane from tempered glass and the mounting housing from polycarbonate. This combination of materials is intended for outdoor use and installation flush with the ground.
The IP67 rating indicates protection against dust and the effects of temporary immersion in water under the test conditions for this rating. When installing the light in the ground, a suitable base and drainage must be provided. It should not be installed in a location where water continuously collects around the housing.

Product specifications
- Type: square recessed driveway light.
- Model: MIX 6725 D.
- Main colour: silver.
- Materials: aluminium, 304 stainless steel, tempered glass, polycarbonate.
- Protection rating: IP67.
- Light source: 1 × GU10, maximum 50 W.
- Power supply: 230 V.
- Static load: up to 1 tonne.
- Dynamic load: up to 1,5 t at a speed of 15 km/h.
Product dimensions
- Height: 17,5 cm.
- Width: 15 cm.
- Depth: 15 cm.
- Shape: square.
Before installation, take the body dimensions and the method of preparing the opening into account. Secure positioning and drainage are important when installing outdoors.


Why choose the MIX 6725 D recessed driveway light?
- The square front complements straight divisions in paved surfaces.
- The IP67 rating protects the fitting against dust and the effects of temporary immersion.
- Tempered glass protects the light source.
- The combination of aluminium and stainless steel creates a silver finish.
- The replaceable GU10 bulb allows you to select the light colour and wattage.
- The specified load resistance helps assess suitability for installation in areas used by vehicles.
Who is this product suitable for?
The MIX 6725 D is suitable for those planning discreet lighting for a driveway, a parking area beside the home, a path or a terrace. Its square form complements surfaces based on simple shapes, while installation in the ground helps maintain a tidy appearance throughout the day.
When choosing a light source, consider the function of the area and the desired light colour. During installation, ensure that the opening is properly prepared, drainage is provided and the power supply is connected safely. The GU10 bulb is not included.
Frequently asked questions about the MIX 6725 D recessed driveway light
Which bulb can be used?
The fitting uses one GU10 bulb rated up to 50 W and a 230 V power supply. The light source is selected separately, allowing its light colour to be matched to the character of the path, driveway or garden.
Is the light intended for outdoor installation?
Yes, the IP67 protection rating indicates protection against dust and the effects of temporary immersion in water under test conditions. However, the installation site must be properly prepared and drainage must be provided.
What load is permitted?
The permissible static load is up to 1 tonne, and the dynamic load is up to 1,5 t at a speed of 15 km/h. Adequate surface stability and installation in accordance with the instructions are essential for proper use.
How does this model differ from the round version?
The MIX 6725 D has a square front, while the MIX 5725 C has a round front. Both models belong to the same family of recessed driveway lights; the shape should be selected to suit the geometry of the surface and the layout of the surrounding elements.
Summary
The MIX 6725 D recessed driveway light is a square silver fitting that uses a GU10 bulb and features an IP67 protection rating and specified load resistance parameters. Its installation in the ground helps maintain a neat appearance while illuminating driveways, paths and other outdoor areas.









Reviews
There are no reviews yet.