Description
MIX 5725 C recessed driveway light
The round MIX 5725 C recessed driveway light is designed for installation in the ground surface to illuminate a selected part of the surroundings without taking up space above ground level. The silver front made of aluminium and stainless steel complements paving blocks, concrete, stone and other hard surfaces.
This solution is suitable for locations where a discreet fixture design and resistance to loads are important. Tempered glass protects the light source, while the IP67 protection rating allows the light to operate in demanding outdoor conditions once the installation site has been properly prepared and drained.
Adjustable beam direction allows the light to be aimed at a selected feature instead of illuminating only the space directly above the fixture. The light source is a separate GU10 bulb rated up to 50 W, allowing its wattage and colour temperature to be selected to suit the lighting design.

Recessed driveway light with an adjustable beam angle for gardens and driveways
The light source can be tilted through a range of 23° to highlight a path, steps, part of a façade, a plant or an architectural detail. This directional adjustment makes it easier to adapt the lighting to a specific location, such as the edge of a driveway or an entrance.
Load resistance is important when installing the fixture in surfaces used by vehicles. The maximum permitted static load is 1 tonne, and the dynamic load is up to 1,5 t at a speed of 15 km/h. These values apply to the fixture when the appropriate installation conditions are met and do not replace the need for a properly prepared base.
The housing comprises an aluminium body, a 304 stainless steel ring, a tempered glass cover and a polycarbonate installation box. This combination of materials is suitable for outdoor installations where the fixture remains recessed flush with the surface.
The IP67 protection rating means complete protection against dust and protection against the effects of temporary immersion in water under the test conditions specified for this rating. For installation in the ground, prepare the site in accordance with the installation instructions and provide water drainage; the light should not be installed in permanently standing water without appropriate preparation of the base.

Product specifications
- Type: round recessed driveway light.
- Model: MIX 5725 C.
- Main colour: silver.
- Materials: aluminium, 304 stainless steel, tempered glass, polycarbonate.
- Protection rating: IP67.
- Light source: 1 × GU10, maximum 50 W.
- Power supply: 230 V.
- Light source tilt adjustment: 23°.
- Static load: up to 1 tonne.
- Dynamic load: up to 1,5 t at a speed of 15 km/h.
Product dimensions
- Height: 17,5 cm.
- Diameter: 15 cm.
- Shape: round.
The fixture is designed for recessed installation in a hard surface or in the ground after appropriate preparation of the base. The dimensions of the body must be taken into account when planning the opening and installation location.


Why choose the MIX 5725 C recessed driveway light?
- 23° adjustment helps direct the light towards a selected garden or architectural feature.
- The IP67 rating protects the fixture against dust and the effects of temporary immersion.
- Tempered glass protects the light source.
- Aluminium and stainless steel form a metal housing for outdoor use.
- The replaceable GU10 bulb allows the light colour temperature and wattage to be selected.
- The specified load resistance allows installation in surfaces used by vehicles to be considered.
Who is this product suitable for?
This model is suitable for planning lighting for a driveway, path, steps, terrace or part of a garden where the light is to be integrated into the ground surface. The round front can complement paving block layouts and slab surfaces, while the adjustment option makes it easier to highlight selected objects.
When installing the light in a driveway, it is important to prepare the opening correctly, secure the fixture and provide water drainage. The electrical installation must comply with the instructions and safety requirements. A GU10 bulb is not included and must therefore be selected separately.
Summary
The MIX 5725 C recessed driveway light combines a round silver front with an adjustable GU10 light source, IP67 protection and load resistance. It is a functional choice for driveways, paths and other outdoor surfaces where discreetly integrated lighting is required to illuminate a selected object.









Reviews
There are no reviews yet.