Description
LED Step Light with Slatted Front and Motion Sensor 0,6 W 12 V
This silver LED step light with a motion sensor illuminates steps, corridors and passageways when someone approaches. The front measures 7,5 cm on each side and features horizontal slots – after dark, the light forms several parallel lines, while during the day the fitting resembles a discreet metal grille on the wall.
A round sensor lens sits in the centre of the front, between two groups of slots. The built-in motion sensor eliminates the need to find a switch on dark stairs and prevents the light from staying on unnecessarily throughout the night.
Three light colour temperatures are available: warm 3000 K, neutral 4000 K and cool 6500 K. Each version has the same silver housing, so you only need to select the shade that matches the rest of the lighting in your home.

Step Light with Motion Sensor for a Flight of Stairs
The LED module consumes just 0,6 W and provides 13 lm in warm white, 14 lm in neutral white and 15 lm in cool white. This is guidance lighting: it outlines step edges and the direction of travel, but does not replace a ceiling light. Several of these fittings can operate on the stairs every night while consuming very little energy.
The built-in controller allows sensor-equipped lights to be installed at the beginning and end of the run. Motion detected by either one can switch on all the lights connected in the system – whether ascending from the bottom or descending from the top, you can immediately see the entire flight of stairs. It is advisable to discuss the wiring arrangement with an electrician before installation.
The light operates at 12 V and requires a 12 V power supply – it must not be connected directly to the 230 V mains. Select a power supply suitable for the combined wattage of all the lights in the circuit.
Product Specifications
- Type: LED step light with motion sensor
- Front design: horizontal slats
- Power: 0,6 W
- Power supply: 12 V, requires a 12 V power supply unit
- Light source: integrated LED, included
- Light colour temperature: 3000 K, 4000 K or 6500 K depending on the variant
- Luminous flux: 13 / 14 / 15 lm depending on the light colour temperature
- Motion sensor: yes, built-in
- IP rating: IP20
- Material: aluminium and plastic
- Colour: silver
Product Dimensions
- Front width: 7,5 cm
- Front height: 7,5 cm
- Depth: 2,3 cm
- Net weight according to the manufacturer: 0,01 kg

Why Choose an LED Step Light with a Slatted Front?
- Motion sensor – the light switches on when someone enters the staircase.
- Slatted design – after dark, the front creates several parallel lines of light.
- Group control – sensor-equipped lights at the beginning and end of the stairs can switch on the entire system.
- 0,6 W consumption – guidance lighting that uses very little energy.
- Three light colour temperatures – warm, neutral or cool, matched to the rest of your lighting.
- LED included – no need to purchase bulbs.

Who Is This Step Light Suitable For?
This is a good choice for a home with an indoor staircase, a mezzanine or a long corridor where you want to see your way at night without switching on the main light. The silver slatted front complements steel balustrades, wooden and concrete stairs, and light-coloured, smooth walls.
The light is also useful in homes where children or older family members move around at night – they do not need to search for a switch in the dark. Remember that it requires a 12 V power supply and that its IP20 rating makes it suitable for dry indoor areas, rather than outdoor stairs.
Frequently Asked Questions About the LED Step Light with Slatted Front
Can the light be connected directly to 230 V?
No. The light operates at 12 V and requires a 12 V power supply selected to suit the combined wattage of the lights in the circuit. Connecting it directly to the 230 V mains will damage the LED module and is not permitted, so provision for the power supply must be made when planning the installation.
Does every light in the run need a motion sensor?
No. The built-in controller allows sensor-equipped lights to be positioned at the beginning and end of the stairs, and motion detected by either one can switch on all the lights in the system. It is advisable to agree on the wiring diagram for the entire run with an electrician before installation.
Which light colour temperature should I choose for the stairs?
Warm 3000 K creates a cosy atmosphere and complements wood, neutral 4000 K provides a natural white light, and cool 6500 K produces a crisp, cool effect. Choose one colour temperature for all the lights in the run to ensure consistent lighting across the entire staircase.
Is the light suitable for outdoor stairs?
No. The IP20 rating means that the light is intended for dry rooms inside the home. For outdoor stairs, a terrace or a damp basement, choose a light with a higher ingress protection rating that is resistant to water and dust.
Summary
This silver LED step light with a slatted front combines a motion sensor, a built-in group controller and power consumption of just 0,6 W. Choose a colour temperature of 3000, 4000 or 6500 K and plan for a 12 V power supply – your stairs will gain a discreet line of light that switches on when needed.









Reviews
There are no reviews yet.