Description
LED Step Light with Opal Front 0,6 W 12 V and Motion Sensor
This square LED step light with an opal front and a horizontal strip across the centre switches on automatically when someone approaches the stairs. After dark, the entire 7,5 × 7,5 cm square emits soft, diffused light, while the strip creates a distinct, contrasting band across it.
The strip is available in three colours: silver, white and black. Silver complements a steel balustrade, white almost disappears against a light wall, and black creates a strong accent alongside dark steps and modern accessories. A round motion sensor lens is positioned in the upper part of the strip.
The silver version offers a choice of warm white 3000 K, neutral white 4000 K and cool white 6500 K, while the white and black versions are available in warm or neutral white.

Step Light with Motion Sensor and Diffused Light
The built-in motion sensor switches the light on when needed – there is no need to search for a switch on dark stairs, and the lights do not stay on all night unnecessarily. The built-in controller allows sensor-equipped lights to be positioned at the beginning and end of the run, so that motion detection switches on all the lights connected in the system.
The opal front diffuses the light from the LEDs, preventing glare even when looking directly at the wall. The LED module consumes 0,6 W and produces 13 lm in warm white, 14 lm in neutral white and 15 lm in cool white – this is guide lighting that marks the edges of the steps, rather than lighting for the entire room.
The light operates at 12 V and requires a 12 V power supply; it must not be connected directly to the 230 V mains. Select a power supply matched to the combined wattage of the lights in the circuit, and plan the wiring for the run with an electrician before installation.


Product Specifications
- Type: LED step light with motion sensor
- Front: opal diffuser with horizontal strip
- Power: 0,6 W
- Power supply: 12 V, requires a 12 V power supply unit
- Light source: integrated LED, included
- Light colour: 3000 K, 4000 K or 6500 K depending on the variant
- Luminous flux: 13 / 14 / 15 lm depending on the light colour
- Motion sensor: yes, built-in
- Ingress protection rating: IP20
- Material: aluminium and plastic
- Strip colour: silver, white or black
Product Dimensions
- Front width: 7,5 cm
- Front height: 7,5 cm
- Depth: 2,3 cm
- Net weight according to the manufacturer: 0,01 kg


Why Choose a Step Light with an Opal Front?
- Motion sensor – the light switches on when someone steps onto the stairs.
- Opal front – diffused light without glare.
- Three strip colours – silver, white or black, to match the balustrade and wall.
- Group control – sensor-equipped lights at the beginning and end of the stairs switch on the entire system.
- 0,6 W power consumption – nighttime stair lighting at minimal cost.
- LED included – no bulbs to replace.


Who Is This Light Suitable For?
This light is suitable for homes with indoor stairs, mezzanines and long hallways – wherever safe passage at night is needed without switching on the main light. Several lights positioned along the steps create an evenly spaced pattern of illuminated squares that complements both wooden and concrete stairs.
Choose the strip colour to suit the surroundings: silver for steel and glass, white for light, minimalist interiors, and black for modern settings with dark details. The IP20 protection rating makes this light suitable for dry indoor spaces.
Frequently Asked Questions About the Step Light with Opal Front
Which light colours are available for each strip colour?
The silver strip version is available in warm white 3000 K, neutral white 4000 K and cool white 6500 K. The white and black strip versions offer a choice of warm white 3000 K or neutral white 4000 K. The light colour is fixed and selected at the time of purchase; it cannot be changed using a switch.
Can the light be connected directly to 230 V?
No. The light operates at 12 V, so it requires a 12 V power supply matched to the combined wattage of all lights in the circuit. Connecting it directly to the 230 V mains will damage the LED module, so the power supply must be included when planning the installation.
Does every light on the stairs need a sensor?
No. Thanks to the built-in controller, sensor-equipped lights can be installed at the beginning and end of the run, and motion detected by either one will switch on all the lights in the system. The wiring layout for the entire staircase should be agreed with an electrician before installation.
Is the light suitable for outdoor use?
No. The IP20 protection rating means it is intended for dry indoor spaces, such as stairwells, hallways or mezzanines. For outdoor stairs, terraces or damp rooms, choose a light with a higher ingress protection rating and resistance to water.
Summary
This square LED step light with an opal front combines a motion sensor, a group controller and 0,6 W power consumption. Choose the strip colour – silver, white or black – and the light colour, and plan for a 12 V power supply so the stairs light up automatically when someone uses them.









Reviews
There are no reviews yet.