Description
Square LED stair light 0,6 W 12 V with motion sensor
The square LED stair light provides discreet illumination for steps, corridors and indoor passageways. It features a built-in light source and a motion sensor positioned centrally on the front. Its small dimensions help create guidance lighting that does not compete with the room’s main lighting.
The product has a compact 7,5 × 7,5 cm front and a depth of 2,3 cm. It is available in silver, white and black-and-white versions; the metallic, light or contrasting finish can be matched to the wall design. The individual versions also differ in light colour temperature.
Warm 3000 K, neutral 4000 K or cool 6500 K light is available, depending on the front colour. Choosing a specific combination creates a consistent look across several lights positioned along a flight of stairs. Not all combinations of colour and light temperature are available.

LED stair light with motion sensor for corridors
The integrated motion sensor allows the light to switch on when movement is detected within its coverage area. This is useful beside steps, in passageways between rooms and wherever discreet guidance lighting is important. The light can form part of an installation with several such lighting points positioned along a wall.
The LED module has a power rating of 0,6 W. The warm version provides a luminous flux of 13 lm, the neutral version 14 lm and the cool version 15 lm. This modest light output suits its guidance function. The LED is built in, so there is no need to purchase a separate bulb; the complete fitting forms a single light source.
The product requires a 12 V supply and a suitable power supply unit, which must be taken into account when planning the installation. This light must not be connected directly to 230 V. The manufacturer also describes compatibility with a control system for a series of stair lights, allowing an individual motion detection point to function as part of a larger system.
The construction combines plastic and aluminium. The IP20 protection rating means it is intended for dry indoor spaces without contact with water. The product photographs allow comparison of the front finishes and housing shape. Before choosing, check the finish and light colour temperature available for the required configuration.


Product specifications
- Type: LED stair light with sensor
- Light source: integrated LED 0,6 W
- Light source included: yes, built in
- Power supply: 12 V
- Colour temperature: 3000 K / 4000 K / 6500 K depending on variant
- Luminous flux: 13 / 14 / 15 lm depending on variant
- Protection rating: IP20
- Materials: aluminium, plastic
- Colour: silver, white, black-and-white
Product dimensions
- Front width: 7,5 cm
- Front height: 7,5 cm
- Depth: 2,3 cm

Why choose this light?
- The motion sensor switches the light on when movement is detected.
- The built-in LED module eliminates the need to select a bulb.
- The square front creates a consistent visual rhythm across several lights.
- Different light colour temperatures make it easier to match the lighting to the interior.
- Three finish options help achieve the desired contrast between the front and the wall.
- The 12 V supply suits low-voltage stair lighting installations.
Who is this product suitable for?
The product is intended for guidance lighting schemes on domestic stairs, in corridors and along passageway walls. It is suitable wherever a discreet lighting point is needed to indicate the direction of travel instead of bright ceiling lighting.
The light can also be considered when creating a larger system of sequential LED stair lighting. To maintain consistency, select an available housing colour and light temperature, and design the installation for the required 12 V supply. Choosing the same version throughout will ensure that successive lighting points along the wall have a uniform appearance.
Frequently asked questions about the stair light
Is a separate bulb required?
No. The light has a factory-integrated 0,6 W LED, so a separate bulb is not required. The light colour temperature is chosen by selecting the appropriate product variant.
Does the device connect to a 230 V mains supply?
No. The correct operating voltage is 12 V, so the installation requires a suitable power supply unit. Direct connection to a 230 V installation is not a permitted way of powering this light.
Which light colour temperatures are available?
Versions with 3000 K, 4000 K and 6500 K are available, depending on the front colour. These correspond to warm, neutral and cool light. The luminous flux is 13, 14 and 15 lm respectively.
Summary
The square LED stair light with motion sensor provides supplementary lighting for dry indoor spaces. It combines a small front, low power consumption of 0,6 W and a choice of several finishes and light colour temperatures. It requires a 12 V supply to operate.









Reviews
There are no reviews yet.