Description
Surface-Mounted LED Batten Light 60 cm 18 W 4000 K – White or Black
The LED Batten light, available with a white or black housing, introduces a simple line of lighting into a dry room. The elongated diffuser and slim housing take up little space below the ceiling, making the light well suited to rooms with limited ceiling height. The white version blends with a light-coloured ceiling, while the black version highlights the outline of the fitting against a contrasting background.
The fitting uses an 18 W LED module and provides a neutral light colour. The integrated light source means there is no need to select a separate fluorescent tube. It is a convenient solution for functional lighting in a corridor, office or utility room that meets the requirements for dry conditions and low dust levels.

LED Batten Light 60 cm – Even Lighting with Two Housing Colours
The construction consists of an elongated body and an opal diffuser. Its surface spreads the light over a wider area, while the rounded ends give the entire light an understated appearance. Both housing versions feature an SMD LED module that forms an integral part of the fitting. There is no need to replace a standard fluorescent tube before the light is first used.
Neutral white light is well suited to work and everyday tasks. The beam angle helps illuminate the space beneath the fitting without concentrating the entire light output on a single small spot. The light can be used individually or in a group of several fittings where more illumination is required.
The luminous flux of the complete fitting is 1850 lm, while the LED source itself delivers 2170 lm. The luminous flux of the complete fitting takes into account the effect of the diffuser and housing, which is useful when comparing lighting products. This makes it easier to plan the appropriate number of lights.
Power is supplied through a properly prepared mains installation. The shallow body and surface mounting allow the batten light to be incorporated into the ceiling layout without large decorative fittings. Electrical installation must be carried out in accordance with the instructions and applicable safety requirements.



Product Specifications
- Type: surface-mounted LED batten light
- Power: 18 W
- Luminous flux of the complete fitting: 1850 lm
- LED module luminous flux: 2170 lm
- Light colour: neutral white 4000 K
- Power supply: ~230 V / 50 Hz
- IP rating: IP20
- Beam angle: 120°
- CRI: 80
- Rated lifespan: 20 000 h
- Energy efficiency class: F
- Dimmable: no
- Light source: LED included
- Material: PC and aluminium
- Housing colours: white or black – selectable in the variants
Product Dimensions
- Length: 60 cm
- Width: 7,5 cm
- Height: 2,5 cm
- Gross weight including packaging: 0,189 kg
The slim design allows the fitting to be positioned discreetly along the ceiling. Surface mounting helps you plan functional lighting without an elaborate decorative fitting.




Why Choose the LED Batten Light?
- The integrated light source allows you to use the fitting without purchasing a separate fluorescent tube.
- The elongated diffuser gives the lighting a neat, uniform appearance.
- The neutral light colour provides practical illumination for workspaces.
- The low profile can make installation easier in rooms with lower ceilings.
- The white or black body can be matched to a light-coloured or contrasting ceiling design.
- The wide light distribution makes it easier to plan several fittings in a larger interior.
Who Is This Product Suitable For?
This batten light is intended for those seeking functional lighting for a dry workshop, corridor, back room or office. It can replace an older type of fluorescent fitting once the electrical installation has been properly prepared. The opal diffuser with a white or black housing complements simple interior fittings, while its shape does not distract attention from the room’s furnishings.
The IP20 rating means the light is intended for dry indoor spaces without significant dust levels. Locations exposed to splashes or moisture should be avoided. The offer includes one LED batten light in the selected colour, rather than a set of several fittings.
Summary
The surface-mounted LED Batten light in white or black is a simple solution for illuminating a dry functional space. An appropriately selected light output from the complete fitting, a neutral light colour and a slim construction help create a neat ceiling layout. The offer includes one fitting with a built-in LED light source.









Reviews
There are no reviews yet.