Description
Mean Well XLG-200-24-A LED Power Supply – 24 V 199,2 W IP67 in a Metal Housing
The 24 V 199,2 W IP67 LED power supply in a metal housing is designed for LED lighting modules requiring a 24 V supply. Its rated power of 199,2 W and current of up to 8,3 A enable operation with compatible lighting installations. The elongated metal housing with attached leads allows the device to be installed as part of a complete electrical system.
The IP67 protection rating indicates increased housing resistance to dust and water under the conditions specified by the standard. This makes the model suitable for consideration in installations requiring more effective protection than a typical open-frame indoor power supply provides. The way connections and cable terminations are made still determines the safety of the entire system.
The wide 100–305 V AC input range allows operation with an appropriately selected mains supply. The device is designed to operate in a mode suitable for LED lighting, with current adjustment available in the version equipped with an internal regulator.

Metal 24 V LED Power Supply for Installations Requiring IP67 Protection
The device has a low-profile metal housing designed to dissipate heat during operation. The body is approximately 19,9 cm long, 6,3 cm wide and 3,55 cm high. Adequate installation space must be planned to accommodate both the housing and the input and output leads.
The version with current adjustment allows the parameters to be adapted within the range specified in the technical documentation. This is a service adjustment for power supply operation, not a function for continuously dimming luminaires. Compatibility between the voltage, load and specifications of the LED modules used must always be ensured.
The nominal 24 V output and rated current of 8,3 A make it easier to select the unit for lighting systems where both the required power and the operating conditions specified by the manufacturer are important. The power supply must be selected according to the number and type of connected devices, without exceeding its operating specifications.
The photograph shows the housing used in this series; the version designation on the label may differ. The version offered has a 24 V output and a rated power of 199,2 W. If in doubt, refer to the stated specifications of the selected device rather than the printing shown in the illustrative photograph.
Product Specifications
- Type: LED power supply with constant-voltage and constant-current characteristics.
- Rated output voltage: 24 V DC.
- Output current: up to 8,3 A.
- Rated power: 199,2 W.
- Input: 100–305 V AC or 142–431 V DC.
- Protection rating: IP67.
- Housing: metal, grey.
- Adjustment: output current, internal regulator in version A.
- Dimming: no external dimming control in version A.
- Connection: factory-fitted input and output leads.
Product Dimensions
- Housing length: 19,9 cm.
- Width: 6,3 cm.
- Height: 3,55 cm.
- Weight: approximately 0,85 kg.
- Shape: elongated metal housing.
Before installation, allow space for the leads and safe routing of the connections.
Why Choose the 24 V 199,2 W LED Power Supply?
- Rated power of almost 200 W: output current of up to 8,3 A for compatible systems.
- 24 V voltage: suitable for devices operating with this supply voltage.
- IP67 protection: sealed housing for demanding installation conditions.
- Metal construction: durable body that dissipates heat.
- Current adjustment: fine-tuning to match the parameters of a compatible load.
- Elongated design: a profile measuring 3,55 cm in height.
- Wide input range: designed for 100–305 V AC.
Who Is This Product Suitable For?
This power supply is a solution for installers and designers of 24 V LED lighting, including installations requiring an IP67-rated housing. It can power appropriately matched modules and lighting sections when their combined parameters are compatible with the output characteristics. Selection should take into account thermal conditions, the connection method and the available installation space.
This is a technical device that requires proper electrical connection. The IP67 rating of the housing alone does not guarantee that all connections in the installation are sealed, so accessories and installation methods appropriate to the operating environment must be used.
Summary
The metal 24 V LED power supply rated at 199,2 W combines a compact IP67 housing, a wide input voltage range and adjustable output current. It is intended for compatible LED installations where power capacity, correct connections and protection against environmental influences are essential.









Reviews
There are no reviews yet.