Description
Mean Well LRS-150-24 LED Power Supply – 24 V 156 W IP20 Modular Metal Switching Power Supply
The 24 V 156 W IP20 modular metal switching power supply is a low-profile power module that converts the input voltage into a regulated 24 V DC output. Its rated power of 156 W and output current of up to 6,5 A allow it to power compatible low-voltage devices, including appropriately selected LED lighting circuits. The perforated metal enclosure helps dissipate heat.
A height of just 3 cm facilitates installation in technical spaces with limited vertical clearance. The enclosure measures 15,9 cm in length and 9,7 cm in width, allowing component placement and cable routing to be planned in advance. Natural convection cooling operates without a fan.
The output can be adjusted within a range of 21,6–28,8 V. This feature is intended to match the electrical parameters correctly to the connected circuit, rather than to control lighting brightness. Before operation, check the requirements of the connected device and allow a safe power reserve.

24 V 156 W Modular Power Supply for Electrical Installations
The input range selector allows the device to be configured for an 85–132 V or 170–264 V AC supply. In a typical 230 V installation, the correct position must be selected before power is applied. The product can also operate with a 240–370 V DC supply, provided the relevant electrical and safety requirements are met.
The 24 V DC output is suitable for devices that require a constant voltage and draw no more than 6,5 A. The 156 W power rating corresponds to the maximum rated load, so ambient temperature, cooling conditions and the required operating margin should be considered when selecting the power supply.
Built-in overload, short-circuit and overvoltage protection help protect the power supply under abnormal operating conditions. The device requires secure mounting and protection against accidental access to electrical parts. The ventilation openings must remain unobstructed.
The IP20 protection rating means that the enclosure is not resistant to water. The power supply is intended for use in a dry environment or a suitable installation enclosure. The photograph shows the enclosure used in this series; the version designation on the label may differ. The dimensions and correct specifications for the 24 V and 156 W version are provided below.
Product Specifications
- Type: constant-voltage AC/DC switching power supply.
- Output voltage: 24 V DC.
- Rated current: 6,5 A.
- Rated power: 156 W.
- AC input: 85–132 V or 170–264 V, selected by switch.
- DC input: 240–370 V.
- Output voltage adjustment: 21,6–28,8 V.
- Protection rating: IP20.
- Material: perforated metal enclosure.
- Colour: silver-grey.
- Cooling: natural convection, without a fan.
- Protection: overload, overvoltage and short-circuit.
- Ambient temperature: from −30°C to +70°C, with load derating according to the derating curve.
Product Dimensions
- Length: 15,9 cm.
- Width: 9,7 cm.
- Height: 3 cm.
- Weight: approximately 0,42 kg.
- Construction: low-profile module in a ventilated enclosure.
During installation, additional space must be allowed for cables, access to terminals and unrestricted airflow.
Why Choose a 24 V Switching Power Supply?
- Rated power of 156 W: for devices operating at 24 V and drawing up to 6,5 A.
- Low 3 cm profile: makes it easier to plan the installation space.
- Metal enclosure: the perforated construction provides natural ventilation.
- Voltage adjustment: the 21,6–28,8 V range makes it easier to match the output to the application.
- Selectable input voltage: two AC operating configurations.
- Electrical protection: responds to short circuits, overloads and overvoltage.
- No fan: convection cooling without additional moving parts.
Who Is This Product Suitable For?
The power supply can be used by installers and those assembling 24 V DC systems that require a compact, modular power supply component. It is suitable for compatible constant-voltage loads, provided their current consumption and start-up characteristics remain within the device’s capabilities.
The open IP20 enclosure requires a dry location, ventilation and appropriate protection of the terminals. Installation on the 230 V mains side and configuration of the input selector should be carried out by a qualified installer with the power disconnected.
Summary
The 24 V 156 W modular switching power supply provides a current of up to 6,5 A, output adjustment and a low-profile perforated enclosure. It is suitable for correctly designed low-voltage systems in a dry environment, with adequate ventilation and protected connections.









Reviews
There are no reviews yet.