Description
Slim LED power supply 60 W 24 V 2,5 A IP20
Slim LED power supply 60 W 24 V 2,5 A IP20 is a slim power supply module designed for compatible lighting systems operating at a constant voltage of 24 V DC. Its maximum output power is 60 W, and its output current is 2,5 A. The elongated housing and pre-attached leads make it easier to plan the installation location within furniture or a prepared installation space.
The product supplies power to suitable LED strips, light bars and modules requiring 24 V. It is neither a light source nor a kit including an LED strip — the package contains one power supply. The device must be selected with consideration for the specifications of the connected devices, circuit lengths and safe installation conditions.
The IP20 rating indicates suitability for dry, protected locations. Before putting the installation into operation, check that the input and output voltages are compatible with the installation requirements and provide the necessary housing cooling in accordance with the device instructions.

Slim 24 V power supply for LED strips and modules
The elongated shape of the device can be useful where the space available for equipment is narrow but sufficiently long. The power supply can be positioned alongside a suitably prepared mounting rail, in a service recess or within a furniture section with access to the wiring. The required installation clearances and provision for heat dissipation must also be maintained.
The 24 V, 2,5 A output means that the combined requirements of the connected devices must match the constant output voltage and remain within the power supply ratings. The 60 W rating is the maximum output power of the device, rather than the power it constantly consumes. The design should allow an appropriate load margin in accordance with the equipment instructions and lighting characteristics.
This model is not a replacement for a 12 V power supply. Connecting a device designed for a different voltage may damage it. Before selecting a power supply, check the markings on the LED device and the requirements of its controller, particularly in systems with brightness or colour adjustment.
The housing shown in the photographs has a light, metallic appearance and a very narrow cross-section, with leads positioned at the ends of the module. Correct connection requires observing the output polarity and electrical safety principles. Work on the mains electrical system should be carried out by a qualified installer.

Product specifications
- Product type: slim LED power supply
- Output type: constant voltage 24 V DC
- Maximum power: 60 W
- Output current: 2,5 A
- Ingress protection rating: IP20
- Intended use: compatible 24 V LED installations and modules
- Quantity: 1
- Housing: slim, elongated
- Leads: extending from the ends of the housing
- Declared service life: 10 000 hours
Product dimensions
- Length: approximately 31,2 cm according to the dimensional data
- Width: 1,8 cm
- Height: 1,8 cm
- Length shown in the diagram: 32 cm
- Packaging: approximately 2,5 × 32 × 2,5 cm
- Weight: approximately 0,101 kg according to the dimensional data
For installation in confined spaces, also allow for the housing ends, leads and the space required to connect them safely.

Why choose the slim 60 W LED power supply?
- 24 V DC voltage – for LED devices requiring a constant voltage power supply.
- 60 W power rating – allows the power supply to be matched to the installation load.
- 2,5 A output current – a clearly specified parameter for selecting compatible modules.
- Narrow cross-section – makes it easier to plan positioning in elongated installation spaces.
- Pre-attached leads – allow connection within a suitably prepared installation.
- IP20 ingress protection rating – clearly defined conditions for indoor use.
- Separate module – allows the power supply to be selected for an individual lighting configuration.
Who is the 24 V LED power supply suitable for?
This solution is suitable for individuals and installers designing furniture, linear or decorative lighting with components requiring a constant voltage of 24 V. The slim design can help accommodate the equipment within furniture where the installation space has limited width, provided that adequate cooling is maintained.
Before purchasing, calculate the total load of the connected devices and check their voltage and control requirements. The IP20 power supply should be positioned in a dry, suitably protected location. Correct connection of the mains input circuit and low-voltage output should be entrusted to a suitably qualified person.
Frequently asked questions about the slim 60 W 24 V LED power supply
Is the power supply suitable for 12 V LED strips?
No. The device has a 24 V DC output and is therefore intended for compatible devices operating at this voltage. A strip requiring 12 V needs a different power supply and must not be connected to the 24 V model.
What do the 60 W power rating and 2,5 A current mean?
These are the maximum output ratings of the power supply. At 24 V, multiplying the voltage by the current gives 60 W. The actual load should be determined by the connected devices, and the design must include an appropriate margin.
Can the module be installed outdoors?
The IP20 ingress protection rating does not provide resistance to rain or splashing water. The power supply requires a dry, suitably protected installation location in accordance with the instructions. This is not a model with enhanced ingress protection intended for contact with water.
What are the dimensions of the slim power supply?
The device body measures approximately 31,2 cm in length and 1,8 cm in both width and height. The technical drawing indicates a length of 32 cm. Before installation in a confined recess, also allow for the leads and mounting ends.
Is the power supply sold together with an LED strip?
No. The offer includes one power supply module, without an LED strip or light fitting. Circuit components must be selected separately based on the 24 V DC specifications, power requirements and principles of correct connection.
Summary
The slim 60 W LED power supply delivers 24 V DC at a maximum current of 2,5 A. Its elongated housing makes it a potential option for installation in a narrow service space, while the IP20 rating requires a dry environment. The power supply must always be selected to match the specifications of the LED devices and the requirements for safe installation.









Reviews
There are no reviews yet.