Description
Mean Well LRS-100-12 LED Power Supply – Modular 12 V 102 W 8,5 A IP20 Metal
The modular 12 V 102 W 8,5 A IP20 metal LED power supply is a switching power source for compatible lighting circuits and other devices requiring a stable DC voltage. Its perforated metal housing helps dissipate heat, while its low profile makes it easier to plan installation inside a suitable equipment enclosure.
The output with a nominal voltage of 12 V and a maximum current of 8,5 A supports a compatible load of up to 102 W. The specifications of connected strips, modules or other loads must be checked individually, also taking cable lengths and conductor cross-sections into account.
This modular power supply is intended for installation in dry, suitably protected spaces. The IP20 rating does not provide waterproof protection, so the device must be protected against moisture and unauthorised access to live terminals.

Modular LED Power Supply for 12 V Installations
Maintaining the correct output voltage is essential for the stable operation of LED light sources. The constant-voltage switching power supply is designed for loads requiring 12 V DC, and its wide input voltage range makes it easier to select for suitable mains installations.
The metal housing features ventilation openings that enable convection cooling without a fan. During installation, ensure that the device can dissipate heat and leave sufficient space around the terminals and housing openings.
Output voltage adjustment allows the setting to be adapted within the range specified by the manufacturer. However, this is not a brightness or light colour controller; these functions require suitable equipment compatible with the connected LED installation.
Short-circuit, overload and overvoltage protection help protect the electronics under abnormal operating conditions. They do not replace proper protection against electric shock, correct cable selection or protection for the entire circuit. Installation should be carried out in accordance with the electrical requirements of the device.
Product Specifications
- Type: Modular switching power supply
- Output voltage: 12 V DC
- Rated power: 102 W
- Output current: 8,5 A
- Input voltage: 85–264 V AC or 120–373 V DC
- Voltage adjustment: 10,2–13,8 V DC
- Ingress protection rating: IP20
- Material: Metal
- Cooling: Passive, convection
- Protection: Short-circuit, overload and overvoltage
- Photo: The photo shows the housing used in this series; the version designation on the label may differ — we supply model LRS-100-12.
Product Dimensions
- Length: 12,9 cm
- Width: 9,7 cm
- Height: 3 cm
- Device weight: approximately 0,34 kg
Why Choose a 102 W LED Power Supply?
- 12 V DC voltage – for compatible low-voltage installations.
- 102 W output power – supplies a suitably selected load.
- Metal housing – protects the electronics and dissipates heat.
- Low 3 cm profile – makes it easier to select an installation location.
- Adjustable voltage – adjustment within the range specified for this device version.
- Passive cooling – operation without a fan.
- Protection features – protection against short circuits, overloads and excessive voltage.
Who Is This Product Suitable For?
The power supply is intended for installers and anyone assembling compatible 12 V LED systems. It can be incorporated into furniture, technical and decorative lighting projects, provided that the load remains within the rated specifications.
Before connection, check the power requirements of the loads, cable routing, cooling and protection against moisture. The perforated metal housing requires correct positioning within a built-in enclosure or installation housing.
Frequently Asked Questions
Can the power supply be connected to any LED strip?
No. The load must operate at 12 V DC, and its current draw and power consumption must not exceed the capacity of the power supply. For longer runs, voltage drops along the cables must also be taken into account.
Is the IP20 housing waterproof?
No. The IP20 rating does not indicate protection against water. The power supply must be installed in a dry, suitably protected location, with safe access to the terminals maintained.
Can the output voltage be adjusted?
Yes, within the range specified for the model. The adjustment is used to set the supply voltage, rather than to dim or adjust the colour temperature of connected luminaires.
Why might the label in the photo show a different designation?
The power supply series uses a common housing design. The photograph may show a different version designation, while the model supplied is the one specified in the specifications on this product page.
Summary
The modular LED power supply with a 12 V output, 102 W power rating and 8,5 A current rating is designed for suitably selected installations. Its metal housing and passive cooling support operation in a properly prepared installation location. Check electrical compatibility before selecting the device.









Reviews
There are no reviews yet.