Description
Metal LED Power Supply 12 V 50,4 W 4,2 A IP20
The compact 50,4 W LED power supply is designed for smaller 12 V lighting installations. Its output provides a current of up to 4,2 A, allowing it to power several suitably selected modules or short sections of LED strip.
The device has a metal housing with a distinctive pattern of ventilation holes. Its low-profile body, measuring 30 mm in height with a footprint of 99 × 82 mm, allows space for the power supply to be planned within the service compartment of a fitted unit without requiring a tall enclosure.
This is a single power supply module, rather than a complete installation with an LED strip and accessories. The total power consumption of the connected devices should be determined in advance, as their requirements must not exceed 50,4 W at 12 V.

Efficient power for short sections of LED lighting
The 12 V version is designed for constant-voltage devices that require a direct current supply. An input range of 85–264 V AC or 120–373 V DC allows it to be used with a compatible electrical supply.
When loading the power supply, both the total wattage and the current required by the connected light sources are important. This model delivers a maximum of 4,2 A and can form part of a system with several separately routed LED sections, provided their combined requirements remain within this limit.
The housing uses natural air circulation for cooling, without a powered fan. Protection circuits respond to short circuits, overloads and overvoltage, but this does not remove the need to select suitable cables and installation protection devices.
The photograph shows an LRS series housing; the dimensions of this model are provided in the specifications. The version supplied is the LRS-50-12, rated at 50,4 W and 12 V, regardless of the numbers visible in the illustrative photograph.
Product specifications
- Type: modular switching power supply
- Output: 12 V DC
- Power: 50,4 W
- Maximum current: 4,2 A
- Input: 85–264 V AC / 120–373 V DC
- IP rating: IP20
- Cover: perforated sheet metal
- Cooling: natural convection, without a fan
- Protection: overload, short circuit and overvoltage
- Application: dry service compartment
Product dimensions
- Length: 9,9 cm
- Width: 8,2 cm
- Height: 3 cm
- Listed weight: 0,21 kg
- Installation requires space for wiring and air circulation
Why choose this model?
- Low profile – the 30 mm height makes it easier to accommodate the power supply in a limited space.
- Output suited to smaller systems – 50,4 W for devices with a rated voltage of 12 V.
- Specified output current – the 4,2 A limit makes it easier to plan the combined load.
- Ventilation holes in the cover – allow passive heat dissipation.
- Built-in protection – responds to specific electrical faults.
- Metal construction – suitable for mounting within a prepared service enclosure.
Who is this product suitable for?
This is an option for installers planning the power supply for small furniture lighting systems, shelves or decorative recesses. The module is particularly suitable where a 12 V supply is required and there is no need for a much larger power supply.
The IP20 rating and exposed terminals mean that suitable protection against contact and moisture is required. Connection to the mains should be carried out by a qualified person after disconnecting the power, with clear space left around the ventilation grille.
When distributing power to several short sections, it is advisable to determine cable lengths and connection points in advance. Cable cross-sections must be suitable for the actual current, and each connected device should operate at the correct voltage. If the planned installation approaches the 50,4 W power limit, the total load and cooling conditions must be checked again. More extensive lighting may require a separate, more powerful supply.
Summary
The 12 V 50,4 W, 4,2 A LED power supply with a metal housing is suitable for properly prepared small LED installations. Before installation, compare the combined load, the voltage required by the connected devices and the available service space with the unit’s specifications.









Reviews
There are no reviews yet.