Description
Mean Well LPV-35-12 LED Power Supply – 12 V 36 W IP67 in a Plastic Housing
The 12 V 36 W IP67 LED power supply in a plastic housing is a switching power supply with a constant output voltage of 12 V and a power rating of 36 W. The device provides an output current of 3 A and is designed for LED lighting installations operating at this voltage. The compact plastic housing encloses the electrical components.
The IP67 protection rating indicates protection against dust and the effects of temporary immersion in water. This makes the power supply an option for applications where enhanced sealing is important for the operation of the installation. The constant 12 V voltage enables suitably selected LED modules to be powered without the voltage changing as the load varies within the specified range.
The device includes short-circuit, overload and overvoltage protection. These features help protect the circuit during certain electrical faults. The power supply has no fan; its design uses natural convection cooling.

12 V 36 W LED Power Supply for Lighting Modules
The input supply range of 90–264 V AC covers typical alternating-current mains supplies with voltages within these limits. The output provides 12 V DC and a current of up to 3 A. In practice, this allows devices designed to operate on 12 V direct current to be powered, provided their power requirements do not exceed the capacity of the power supply.
The sealed plastic housing protects the components, and the design meets electrical protection class II requirements. The power supply is designed to operate at temperatures from −30°C to +75°C. These features are useful where housing insulation and suitability for ambient conditions are important.
The circuit includes protection that responds to short circuits, overloads and voltage increases above the permitted level. The stated resistance to a brief input voltage surge is 300 V AC for five seconds. These parameters help with selecting the device for a project, but do not replace the protection required for the installation.
The photograph shows the housing used in this series. The variant designation on the label may differ; the power supply offered has a 12 V output and a power rating of 36 W. This is particularly important in projects where similar-looking housings may contain power supplies with different output voltages.
Product Specifications
- Type: Constant-voltage LED switching power supply
- Output voltage: 12 V DC
- Rated power: 36 W
- Output current: 3 A
- Input voltage: 90–264 V AC or 127–370 V DC
- Housing: Plastic
- Protection rating: IP67
- Protection class: II
- Protection: Short-circuit, overload, overvoltage
- Cooling: Natural convection, fanless
Product Dimensions
- Weight: Approximately 0,4 kg (estimated value)
Why Choose the 12 V 36 W IP67 LED Power Supply?
- 12 V power supply – the stable output voltage is intended for compatible LED lighting systems.
- 36 W power rating – allows a small lighting system to be selected to match the 3 A output current.
- IP67 protection – the sealed housing protects the device against dust and water within the limits of its protection rating.
- Class II insulation – the design meets electrical protection class II requirements.
- Protection features – the device responds to short circuits, overloads and excessive voltage.
- Fanless operation – does not require mechanical cooling using a rotating fan.
Who Is This Product Suitable For?
The 36 W model is suitable for installers and users preparing an installation with 12 V LED modules or other LED loads. When selecting the power supply, particular attention should be paid to the total power consumption of the connected devices and the compatibility of their power requirements with the constant output voltage of the unit.
It is also a solution for projects where a sealed plastic housing and protection class II are important. The user receives a power supply with electrical protection features and a specified wide operating temperature range. The device should operate under conditions that comply with its specifications.
Summary
The 36 W LED power supply with a voltage of 12 V provides an output current of 3 A, an IP67 plastic housing and protection class II. Short-circuit, overload and overvoltage protection complement the fanless cooling design. Select the device to match the specifications of the planned LED setup.









Reviews
There are no reviews yet.