Description
White 360° IP20 ceiling microwave motion sensor
White 360° IP20 ceiling microwave motion sensor is a controller that activates compatible lighting when movement is detected in a room. Unlike a PIR sensor, it uses microwave technology operating at a frequency of 5,8 GHz. This makes it a distinct type of lighting automation solution, although it has a similar small housing mounted on the ceiling.
Detection covers a full 360° angle, and the detection radius can be adjusted from 3 to 10 m. The adjustable detection range allows the response to be adapted to the size and characteristics of the monitored area. The built-in dusk sensing function also takes ambient brightness into account, limiting unnecessary activation of the lighting.
The white, round housing has a flat profile and an IP20 protection rating. It is designed for dry indoor spaces and for use with an existing lighting circuit, rather than for illuminating a space on its own. The electrical specifications must be checked before installing the device.

Microwave motion sensor with adjustable detection and dusk settings
The sensor’s primary purpose is to respond to movement within a selected area and control how long the connected lighting remains on. The hold time ranges from 10 seconds to 15 minutes. This means that the light can remain active for a selected period, instead of relying on a single fixed setting.
The sensor also offers a brightness threshold setting ranging from 10 to 2000 lx. This allows the lighting response to be adapted to daytime and evening conditions while retaining motion detection. This solution is useful in circulation areas and rooms where light levels change with the time of day.
The device should be installed at a height of 1,5 to 3,5 m. Microwave detection uses radio waves, and its effectiveness depends on the surroundings and settings; the operating radius should therefore be set appropriately before use. The control settings should be adapted to the room layout and the desired response of the lights.
The power supply is 220–240 V AC, 50/60 Hz. The maximum load is 800 W, while the stated limit for LED luminaires is 400 W. The sensor consumes 0,9 W for its own operation and is intended for indoor installations with an IP20 protection rating that are not exposed to water.


Product specifications
- Type: ceiling microwave motion sensor with dusk sensing
- Detection technology: microwave, 5,8 GHz
- Detection angle: 360°
- Detection radius: adjustable 3–10 m
- Adjustable hold time: 10 seconds – 15 minutes
- Dusk threshold adjustment: 10–2000 lx
- Voltage: 220–240 V AC
- Mains frequency: 50/60 Hz
- Maximum load: 800 W, LED lighting 400 W
- Own power consumption: 0,9 W
- Protection rating: IP20
- Colour: white
Product dimensions
- Diameter: 10,8 cm
- Thickness: 2,7 cm
- Installation height: 1,5–3,5 m
- Estimated weight: 0,17 kg (estimated)

Why choose a 360° microwave motion sensor?
- Microwave technology – provides an alternative to sensors that use PIR infrared detection.
- Adjustable radius – allows the response range to be adapted to the requirements of the space.
- Extended hold time – allows the lighting operating time to be set to over ten minutes.
- Dusk threshold adjustment – takes ambient brightness into account during automatic control.
- All-round ceiling detection – covers the full angle around the installation point.
- Compact housing – the flat profile remains visually discreet on the ceiling.
Who is this product suitable for?
The sensor meets the needs of users who want to automate lighting in a hallway, utility room or another dry space where motion-activated lighting is used. It allows the detection area and the time the light remains on to be selected, which is useful in areas used at varying intervals.
It is intended for people setting up or upgrading a 230 V installation with compatible luminaires. Before installation, check the maximum load, installation height and the sensor’s adjustment range. The mains connection should be made in accordance with safety requirements.
Summary
The microwave sensor combines ceiling-mounted 360° motion detection with an adjustable radius, dusk threshold and lighting operating time. It operates on mains voltage and is used to control compatible lights in dry indoor spaces. Choose it when you need an adjustable microwave detection range.







Reviews
There are no reviews yet.