Description
White recessed ceiling PIR motion and dusk sensor 360° Ø75 mm IP20
The PIR motion and dusk sensor 360° is designed to switch lighting on automatically when activity is detected in a room. Its ceiling-mounted design allows it to respond to movement from different directions, making it practical for corridors, utility rooms and passageways.
The device has a white, round housing with a protruding detection lens. Recessed ceiling installation maintains a discreet appearance, while the dusk detection function allows operation to be restricted to conditions with a sufficiently low light level.
The sensor operates at 220–240 V AC and requires correct connection to the lighting circuit. It is not a light source, but a component that controls a connected load when motion is detected and the ambient light condition is met.

Ceiling PIR sensor 360° with adjustable lighting duration
The detector covers the area around its installation point through a full 360°, with a stated motion detection range of up to 6 metres. The device should be installed at a height of 2,2 to 4 metres to operate as intended.
The adjustable dusk threshold ranges from approximately 10–2000 lx. This allows you to select the ambient light level at which the controller permits the light to switch on. This function helps prevent unnecessary lighting operation in a bright room.
The lighting hold time can be set from approximately 10 seconds to 7 minutes. This makes it easier to adapt the installation’s operation to a passageway, storage room or corridor. A shorter delay may suit areas people pass through quickly, while a longer delay may suit more frequently used spaces.
The maximum load depends on the type of connected device: up to 1200 W for resistive loads and up to 300 W for LED light sources. When planning the installation, the inrush current characteristics and the specifications of the particular luminaire should also be checked.

Product specifications
- Type: ceiling PIR motion and dusk sensor
- Detection angle: 360°
- Detection range: up to 6 m
- Voltage: 220–240 V AC
- Frequency: 50/60 Hz
- Dusk threshold: approximately 10–2000 lx
- Hold time: 10 s – 7 min
- Permissible load: 1200 W resistive / 300 W LED
- Power consumption: 0,9 W
- Installation height: 2,2–4 m
- Operating temperature: approximately −20 to +40°C
- Ingress protection rating: IP20
- Housing colour: white
Product dimensions
- Front diameter: approximately 75 mm
- Overall height: approximately 65 mm
- Net weight: 0,096 kg
- Dimensions as shown in the manufacturer’s drawing

Why choose a ceiling PIR sensor?
- Automatic control – the light can switch on when motion is detected.
- All-round detection – a 360° operating angle for ceiling installation.
- Dusk threshold – adjustable to suit the brightness of the room.
- Adjustable duration – keeps the lighting on for a set number of seconds or minutes.
- Compact recessed design – a white, round component that suits light-coloured ceilings.
- Separate load limits – specified ratings for LED lights and resistive loads.

Who is this product suitable for?
The sensor is useful for anyone setting up automatic lighting in corridors, passageways, utility recesses or other dry indoor spaces. It makes lighting control easier without having to use a conventional switch each time.
The IP20 rating is not suitable for areas exposed to water. This mains-powered device must be installed by a suitably qualified person, and the load and wiring method should comply with the specifications of the sensor and the connected lighting.
Summary
The PIR sensor 360° with an adjustable dusk threshold and hold time allows indoor lighting to be automated. Its ceiling-mounted design detects movement from multiple directions, while its operating settings can be adjusted to suit the requirements of a particular circuit.







Reviews
There are no reviews yet.