Description
L-shaped 2-pin connector for 8 mm SMD/COB LED strips, 5 A
The L-shaped 2-pin connector for 8 mm SMD/COB LED strips, 5 A is a small plastic connecting component designed for compatible LED strips with a width of 8 mm. Its L-shaped design provides a corner connection between two sections of strip.
The snap-fit mechanism provides a solder-free connection, so there is no need to prepare soldered contacts to make a compatible connection. This is a ready-made lighting accessory that does not replace either the LED strip or the power supply.
The connector works with SMD and COB strips with two contacts. It operates in installations powered by 12 V or 24 V and is designed for a current load of up to 5 A. The IP20 housing is suitable for use in dry indoor spaces.

Snap-fit connector for LED strip corner connections
Routing a light strip around a corner requires a component with the appropriate geometry. The L-shaped design allows compatible sections to be joined in a corner arrangement, instead of using a straight connector where the direction changes.
The suitability of the component depends not only on the LED technology, but also on the strip width and contact layout. For this connector, the 2-pin configuration is essential, so selection should also take into account the position of the contacts on the strip being connected.
The plastic body makes this a compact accessory for LED installations. Its low height and narrow width distinguish this part from larger system components. Its protection rating rules out use in locations exposed to water.
The snap-fit connection method allows a connection to be prepared without soldering. This makes it a solution for installations designed to use mechanical connections between compatible strips routed around a corner. The purpose of this accessory is to connect strips, rather than control the colour or brightness of the light.

Product specifications
- Type: L-shaped snap-fit connector
- Application: SMD/COB LED strips
- Strip width: 8 mm
- Number of contacts: 2-pin
- Connection: Solder-free
- Voltage: 12 V / 24 V
- Current: 5 A
- Protection rating: IP20
- Material: Plastic
Product dimensions
- Width: 1,7 cm
- Depth: 1,7 cm
- Height: 0,5 cm
- Gross weight: 0,002 kg


Why choose an L-shaped connector for LED strips?
- Changing the connection direction – the L shape allows suitable strip sections to be arranged around a corner.
- No soldering required – the snap-fit mechanism mechanically connects the contacts.
- SMD and COB compatibility – suitable for two popular LED strip designs, provided they have the correct dimensions and contacts.
- Easy type identification – the 2-pin layout specifies the required light strip configuration.
- Support for two voltage standards – the specifications allow use in suitable low-voltage installations.
- Clearly defined load limit – the 5 A rating helps verify compatibility with the planned installation.
- Compact construction – the small plastic housing forms a discreet part of the connection.
Who is this product suitable for?
This accessory is intended for anyone assembling an LED strip corner connection in a dry room. It is useful when two strip sections need to form an angled arrangement and a snap-fit connection has been chosen instead of soldering.
It is suitable for compatible LED strips with a two-contact layout. Selecting the connector requires checking the strip width, supply voltage and current load, as the corner shape alone does not guarantee compatibility with all strip types.
Summary
The L-shaped snap-fit connector is used to join compatible SMD and COB LED strips at corners without soldering. It is a small plastic component with two contacts and IP20 protection. Before selecting it, please check that the strip dimensions and power supply parameters are compatible with this accessory.









Reviews
There are no reviews yet.